• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: hemichuck
  • Content: Threads
  • Order by date
  1. hemichuck

    WTB 66/67 B body clutch pedal assembly

    looking for a 66/67 clutch pedal assembly for my Belvedere 4 door so I can install my Kiesler 5 speed. I don’t think I need the overcenter spring.
  2. hemichuck

    Getting ready to swap disc brakes on the front of my 66 Belvedere, any advice

    I just picked up a 1966 Plymouth Belvedere 4 door and I’m going to drop in a 528 Hemi with a manual valve bodied automatic and a 4.10 gear. Before the motor drops in I want to convert it to disc brakes up front. Right now it has 4 wheel 10 inch drums and I will will be converting the rear to...
  3. hemichuck

    SOLD 2012 Challenger R/T Classic edition sell/trade

    I have a 2012 Challenger R/T Classic edition that I would love to sell or trade for an older Mopar to put my 528 Hemi in. My daughter bought this car in 2013 and has put 75,000 miles on it. 5.7 Hemi with automatic transfer and 3.91 rear end. This cars in really nice shape and runs fantastic. I...
  4. hemichuck

    FOR SALE New W2 race heads and Headman Hustler headers

    I have a new set of W2 race heads that have never been assembled and I also have the valves. Mopar Performance part P5249769 they are the 65cc closed chambers for a 59 degree(stock) block. Asking $900 plus shipping from 40272 I also have a new set of Headman Hustler W2 race headers for B and E...
  5. hemichuck

    FOR SALE Brand new W2 headers for B & E bodies Headman Huslers

    Brand new W2 headers for A bodies Headman Huslers I have a brand new set of Headman Husler headers for A bodies that fit a small block with W2 heads. Complete brand new with gaskets and plates and instructions and stickers. Located in Louisville Ky. They cost around $792.99 but I will take $450...
  6. hemichuck

    MP 426 Hemi single 4 barrel intake

    P4876188 V8 Dual Plane Hemi Intake Manifold. Rectangle port and fits all hemi 426/472/528 engines. stock exhaust heat location on rear of manifold just like the original dual plane 4bbl production in-line manifold.Cost 237.00 brand new. This one has been bolted on but it has never had any fuel...
  7. hemichuck

    New KB236-020 pistons for 440 mopar

    I have a set of Kieth Black 440 +020 pistons for sale. these are the hypereutectic pistons and they have the small quench dome Here is what KB says about them Bore is 4.34,Stroke is 3.75,rod length 6.78,Pin Diameter 1.094, compression height 2.057,Piston weight 775g, pin weight 190g, Comp ratio...
  8. hemichuck

    A body/Hemi offset brake adaptor and master cylinder rod

    This is a Mopar Performance # P5249717 Offset brake adaptor which was used to move your master cylinder over to clear the Hemi valve covers. It cost $86 back in 1995 and I also have the adjustable master cylinder rod from Mancini Racing that you need with this, it cost $77.95 back in the day. I...
  9. hemichuck

    B-RB distributor adaptor

    This is a Mopar Performance distributor adaptor that allows you to run an RB dist. in a low deck motor. They were about $50 from Mopar.I will take $25. Attached Images
  10. hemichuck

    426 Hemi 12.5 forged pistons Super Stock

    This is an old set of Direct Connection 12.5-1 pistons for a 426 Hemi.Forged and in remarkably good shape for something thats been in my garage since the 70's. I cant remember if they are std or oversize but I will get the dial calipers out and get a measurment later.I'm pretty sure at this...
  11. hemichuck

    TRW forged 340 +060 pistons

    I have a set of TRW L2316 forged pistons that fit a 340 +060 which makes them 4.10 bore for a stock 3.31 stroke crank. 10.5 compression ratio with stock 340 heads.Used,dirty but in decent shape with minor wear on skirts.No pins. I would like $125 obo or trade something. You pay the actual...
  12. hemichuck

    TRW forged 340 +030 pistons

    I have a set of TRW L2316 forged pistons that fit a 340 +030 which makes them 4.07 bore for a stock 3.31 stroke crank. 10.5 compression ratio with stock 340 heads.Used,dirty but in decent shape with minor wear on skirts.Come with floating pins and locks. I would like $150 obo or trade something...
  13. hemichuck

    Anybody ever heard of Beach City Dodge?

    I am building a 1971 Charger SE-440 HiPo car and its an original California car that was built in Los Angeles. When we took the cluster out it had written on the back of it "Beach City Dodge" and the name Maples and RO#76552. I'm assuming this car was probably ordered by someone named Maples at...
  14. hemichuck

    Offenhauser 360 intake for 413-440

    I have an Offenhauser 360 degree intake for an RB engine 413-440 in great shape.Big carb flange(maybe Dominator?) Iwill take $100 plus freight or you pick up.It would look really good on an early car or Nostalgia car.Open to trades also.
  15. hemichuck

    Rebuilding a 1971 Charger SE

    I am in the process of redoing my 1971 Charger SE.Its a 440 HiPo car and its going back to pretty much stock trim.I was wondering if anyone knew of a source to get new AC hoses and an evaporator for this car.I would like to replace them while the dash is out.
  16. hemichuck

    Old Kentucky Mopar Guy new to forum

    Hello from Kentucky.My name is Chuck and I've been messing with Mopars for around 35 years and have owned quite a few. I've been pretty regular on the Mopar swap meet circuit for the last 30 or so years. I dont usually get a lot of time in front of the computor but its cold outside and a lot of...
Back
Top