Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Years ago when I was having billet cranks made, I had the opportunity to watch a crankshaft being machined at Scat Enterprises.
I could see very little due to the coolant and waste chips. but this video gives a better idea what actually goes on...
NFL UPDATE: The American Indian Counsel has requested that the NFL disassociate itself with Indian Names. The Washington Redskins will therefore change their name to the Washington Foreskins in honor of all the pricks in Washington DC, effective immediately.
What type of grease do you guys use in your manual steering boxes?
I rebuilt a box to convert my 63 to manual steering and not
sure what to use.
The old box had what looked like a light viscosity grease similar to Lubraplate 105
Looking for the metal trim pieces that go on the sides of the bench seats on a 63 plymouth fury.
I know it's probably a longshot but worth a try.
Thanks!
Looking for a couple of old 8 3/4 axles. I don't care if they're bent, small or large pattern, rusty etc.
I'm just going to cut the splines off about 8" from the end and make a suregrip tool.
Hopefully from the Southwest area as I'm in Northern Arizons
I'm building a 65 pushbutton transmission to replace my 63 with and will be needing a 65
driveshaft. Car is a 63 plymouth Fury. Anyone have one?
Thanks!
Hey guys,
Could you guys give a rough value on a complete but basketcase 63 426 MW?
Has original cast exhausts, 3705 carburetors, 286 heads etc etc. I ran one many years ago and I'd like another for my 63.
This is complete from pan to Air cleaners just taken all apart and sitting for...
Anyone have the sunvisor hardware for a 63 Plymouth Fury? or complete
sun visors? It seems like every set I find has the wrong hole center dimensions.
My car has 1.562 accross the front holes and 1.375 from the Front holes to the back hole.
I'm starting to think I've got a Hermaphrodite...
Does anyone know if the oil pan can be removed with the engine remaining in the car? This car is a 63 Fury with a big block.
It looks like it could be done by removing the tie rods and center link
but I'd like to know if anyone here has tried it.
Thx in advance
Hi Everyone,
I'm doing a 63 Fury and someone has installed what looks to be a foreign
master cylinder/power brake unit.
I'd like to replace this with an American made Duel M/C.
Since the engine has so little vacuum, I'd like to use a Non power assist
M/C. Anyone have an idea what to use or...
Hi Everyone!
After lurking on this site for awhile, I decided I'd better join up.
It's always fortunate to have a site like this and be able to ask questions,
read posts and learn.
In 67, I had an original 63 Max Wedge I ran at most of the So Cal Dragstrips.
I got drafted in 68 and when...