Search results for query: *

I am thinking of purchasing a MIG for doing patch work on my cars. It will be used only occasionally. I am looking for a unit that gives a big bang for the buck and is relatively inexpensive. Again this will only be used most probably for tacking and spot welding. I want a very simple to use...

I have a 64 fury with p/b transmission. The engine needs rebuilt..but I have found another 318 Poly engine that is in great shape. I have never Pulled and engine in my life. What is the correct procedure? I basically am unsure of how to disconnect the transmission and make a clean pull. The...

finally found running 318la in a 66(?) Coronet. Is there any positive way to identify this motor from a Poly 318. I have 2 Polys...1 running great the other needs a rebuild. I want to replace the Poly with a 318la which has many after market parts. I will be taking photos of the poly for...

My 318 poly needs extensive work to get it up and running. I am looking for a newer 318(la) to replace it. I have been told that it is a relatively easy match-up. I am looking for something that was running and complete.....possibly one that was swapped out for a bigger mopar. I have a 64 fury...

I am looking for a newer 318 than my poly 318 that is ready to go. A take out and put back in exchange would be nice. I don't know who has what..but a motor which has been ramped up would be great. I am not sure what year's I could put in my 64 fury but I am sure that there are plenty out...

i recently replaced the valve seals on my 64 318 poly. what is the correct way to adjust the push rods. they had to be removed to rotate the rocker arms up to get at the seals. i was told "not to tight, not to loose!" i have gone through the manual and did not find much info. any advice is...

I have a 318 poly in my 64 Fury that is not running. Will a newer 318 be and easy swap. This would allow for less costly modifying the manifold and cam etc.ii

I have just purchased a set of cragars 14x6 for my 65 coronet. My son wants to put wider tires in rear. What can be done? What size tires can be placed on rear? I can place two of craters on my 64 fury. Should I order larger cravats for rear?

We are in the midst of changing valve seals on our 64 fury. the left bank was relatively clean for a car that has a 1990 inspection sticker. The right bank has alot of sludge buildup.......and a blocked drain hole. I have cleared pieces of head gasket out......stuck long screwdrivers down...

finally broke the drums free with a torque gun and proper drum puller......took us 3 weeks to get the proper puller and quite and effort with the gun but it worked! now onto to redoing the shoes, springs, w/c and lines........cant thank you all enough for the suggestions!

the reverse lights on my coronet 65 were working but i worked on the console to fix the high beam switch. what controls the reverse light switch sequence......i will be looking at the switch on the transmission itself tomorrow.....i will be looking 12vdc + at the switch...and toggle the reverse...

I am having a problem in that the redlight in speedometer is not turning on or turning on and turning off.for highbeam....for whatever reason. Is this problem normally associated with the high beam switch or the wiring off the light switch....I do have a used switch and new foot switches are...

are there any vendors who special vendors who specialize in replacement quarter panels and rockers for 64 plymouth furies? :jerk:

this 64 fury has become quite a challenge. i have ordered a puller off of ebay for $85 with no tax and free shipping. Not a bad price, compared to most. Last night we replaced the master cylinder(single piston) and tried to get pressure so we could at least move car to and easier area to...

I am really having a difficult time removing rear drums! I have removed many drums in the course of this lifetime but am asking if there is something I am missing? there is a bolt at the end of the shaft......don't know bearing and seals are underneath or whether it even needs to be removed. I...

i have a 65 coronet with 318 wide block. Saturday, I was getting some replacement parts at autozone and.........i ran into and igniton proble. no starter noise when turning key. Luckily I met super mechanic and he started my car with a screwdriver ......old school...but I hadn't seen done in...

I own a 64 Fury 4 door and have been offered a 440 rebuilt with 4bbl and just about everything for the install more or less free of charge. As of now I have a 318 wide block. I am told that I will need a different transmission. What model tranny is called for? Also, this has a push button...