• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1968rt

    915 heads in a 69 GTX

    Heres what I know about 67 closed chambered heads. factory HP castings have a large HP stamped into the flat part that accessories bolt to. Small valve 915s do not. Over the counter 915 heads have a 440-X or a 440 HP stamped under the manifold runner and no cast in letter. Also large valve 915...
  2. 1968rt

    1970 B-bodies back in the day

    same car from previous owner 1974............
  3. 1968rt

    1969 GTX repo trunk trim panel...anyone try one?

    That's just what I was afraid of. I'm curious to know if they re-tooled because of that problem.
  4. 1968rt

    1969 GTX repo trunk trim panel...anyone try one?

    Classic industries is now selling a 69 GTX trunk trim panel. Anyone have experience with one? I have heard horror stories about some of the older style repo ones.
  5. 1968rt

    440 swap and no pilot hole drilled in crank ? Please what are my options ?

    Here are the input shaft trimming specs.
  6. 1968rt

    Dynomax Turbo Mufflers

    from my earlier post : These are Dynomax Super turbos 2 1/2" TTI pipes on a 440 with a .528 camshaft stock manifolds
  7. 1968rt

    The color on the 69 in Dirty Mary Crazy Larry

    Curious yellow Y3 is Citron Yella. Limelight is J5 which is a totally different color. I think it is a custom mix by the Hollywood studios
  8. 1968rt

    Dynomax Turbo Mufflers

    These are Dynomax Super turbos 2 1/2" TTI pipes on a 440 with a .528 camshaft stock manifolds
  9. 1968rt

    1970 B-bodies back in the day

    Found a few more.
  10. 1968rt

    New Family Member - 69 GTX - Electronic Ignition Box

    Behind the manifold on the valley pan hold downs. They sell a bracket.
  11. 1968rt

    1970 B-bodies back in the day

    Summer 1976. B7 white top. pretty car. Vitar transmission with 3000 stall
  12. 1968rt

    Six Pack Idle help!!

    I did the shaft bushings on the older set. On the newer set the shafts were still pretty tight.
  13. 1968rt

    Six Pack Idle help!!

    I have 12lbs vacumn, fluctuating to 14. running the Mopar .528 -284. I never checked the power brake connection.
  14. 1968rt

    Six Pack Idle help!!

    Im guessing the center carb is the problem
  15. 1968rt

    Six Pack Idle help!!

    Had an older set of carbs on my motor. Idled good, just ran a tad rich. I decided to rebuild another set. I had them boiled out and plated and then did a fresh rebuild. The new carbs will not idle at a reasonable rpm. When I bring it down around 900 rpm I get a surge for a minute and then it...
  16. 1968rt

    Ballpark $$ on this 69 GTX

    Heres the tag: 29 =Gate 152=Base 208837 = sequence number. All are related to the production of the body in white. 9=1969 model year A = Lynch Road Plant 205194 = VIN number 915 = engine assembly = B body 440-4bbl HP with four speed 644 = rear axle assembly = B body 9.75 Dana with 4:10...
  17. 1968rt

    Ballpark $$ on this 69 GTX

    Queens
  18. 1968rt

    Ballpark $$ on this 69 GTX

    additional pics
  19. 1968rt

    Ballpark $$ on this 69 GTX

    Not running, motor spins free
  20. 1968rt

    Ballpark $$ on this 69 GTX

    Ive been toying with the idea of selling this project. Looking for a ballpark figure where to start. Needs front floor, lower quarters, full trunk and rear window areas. Its a super Track pack, 4 speed, numbers matching 440,dana, air grabber with PW tach, AM FM, 6 way seat, and great color.
Back
Top