Search results for query: *

My info was correct. Motor was assembled Oct 5 1967 for a 68 car. Car was assembled Oct 20, 1967. Everything is perfect.

68 non HP motors will not have any stampings on bell house area.

Look here http://www.dodgecharger.com/forum/index.php/topic,51548.0.html

064570 should only match the trunk lip and sometimes the radiator support, not the vin

Motor assembled Oct5 67 confirmed by the 2260 on bottom. R means 290 horse. Build date of Car Oct 20. Looks perfect!

Could you be getting contaminants from the compressor?

After the prime and sanding, did you use a prep sol? I stopped using it because I was having problems. I just blow it off and then a tack rag.

Keep it old style. Pick up a big block, cheap enough to build.

make sure you neutralize the stripper when complete or it will come back and haunt you!

I cant get a shot right now the car is away for the winter. The slot is where the two firewall sections meet at the low point. What you can do is cut a slot about 1 inch above the welds. Then pry it away from the inner firewall to leave a slot. You need to put seam sealer where the upper and...

Nice car! A word of advice, you have to put the drain slot back under the windshield wiper motor. Three drains total, left and right side cowl and the one in the middle. If not it will fill with water and create another problem. I just completed the same repair on mine.

Is that originally TT1 medium green paint code or FF1 light green? your not going original?