• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1968rt

    CPPA and TTI same design headers?

    I have an old pair of 1 7/8" CPPA headers. They appear the same as TTI. I would like to order the header back system from TTI. Do you think they would fit properly?
  2. 1968rt

    Exhaust options for 68 B-Body with 78 400

    Buy a set of B body HP manifolds. Anything from 67-72 should fit fine. Just make sure you give the manifold numbers to TTI while buying the exhaust. The clocking is different on certain years. 68 manifolds with TTI 2.5 H pipe here.
  3. 1968rt

    HP Manifolds vs TTI Headers ?

    Whats more important to you? 30HP or burnt plug wires or hard to remove plugs.
  4. 1968rt

    73-74 HP manifolds on a '67 B-Body?

    You didnt mention log manifolds in your first post. No they will not line up. Also the diameter of the outlet is larger on the HP manifolds. 2.5"
  5. 1968rt

    73-74 HP manifolds on a '67 B-Body?

    Drivers outlet should be the same. Passenger side the clocking is different. Check TTIs website.
  6. 1968rt

    Show us your Exhaust Note

    68 440HP 915 heads ported polished 10.2 comp HP manifolds .528 Purple Shaft TTI 2.5 exhaust w/H pipe Dynomax Super Turbos warming up, about 1600 rpms
  7. 1968rt

    68 Charger exhaust top mounting issue

    I had a similar problem. I ground the tab down slightly then greased it to get it in the rubber. As far as the tilt goes, install the mounting bracket then install just the tip and check the angle. It does seem a bit much.
  8. 1968rt

    Manifolds or headers?

    Read this article by Andy F http://www.moparts.org/Tech/Archive/bb/550hp.html
Back
Top