Search results for query: *

I was told that any imperfection prior to anodizing will be magnified after. So I had the trim stripped and kept it polished. This car I might do the same. If you can find a good dentist that is a car guy, he can take the dents out.

It would help clarify things if postings included what country you were from. Your knowledge of MOPARS. In our local club you are open for comments if something is ESPECIALY not correct, and you are a long term member. These comments are made low key. Most would not take apart a new member’s...

As far as I know67 didn’t have a lane changing feature.

I put a jobber switch in one of the cars in 1985, and it still works. Rest of the cars have original switches.

If you weren’t planing on replacing the trans on the roadside, you would have more trunk space!!

I have seen it done.

So! Is this the time to ask how many people have hot water heaters in their house!!!! Or do they have water heaters?

About 2001, I decided to go to our largest Mopar Meet in the province. 140 miles away. I think at one time we had about 150 cars. The day before I had an overheating problem to correct. I loosened off the heater hose to bleed the air. Solved that problem, refilled the rad. 50-50 mix. Younger...

I respectfully disagree. We may call them frost plugs, but that wasn’t what they were designed for. Lots of countries in the world would have no use for frost frost plugs. They still have plugs though.

For those who ever get in the position where their heater doesn’t work. February 1967. -25F. Had to make a 180 mile trip. Fan wouldn’t blow any hot air. It was Sunday, I stopped at a local guy that sold fuel and tires etc, we put the car in and could not get it to blow warm air. Solution was...

There is a daily driver 2004 Toyota 4Runner here with about 375,000 K if not more. Very minimal rust. Lots of 80’s trucks and cars that will still pas a safety inspection. I didn’t think you got very much snow in the first place.

Thank you. I am mainly looking for the cuts on the firewall.

Did this install with one son’s auto in 1991, our auto in 93, and the other son’s 4 spd in 2017. We winged it with that one. It’s tucked in tight storage out of the City. It seemed that the early carpets had some identification of were to cut. The carpets have been lying on the floor for a...

The car had body work and was painted about 1984. Someone made carpets for it. I talked to the fellow that had the work done. He sold the car in the early 90’s. I saw it at a car show here about 1998. I told Donna to let me know when she wanted to sell it She called me in 2004 and to come...

Moisture. We built a cabin at our lake in 1984-85, built a 3 foot pony wall with gravel floor. Covered the gravel floor with vapour barrier, we have not had any problems with moisture. 1974 we parked our original Charger in a wooden machine shed that was built about 1925. It had a gravel...

In 1978 a friend really wanted a Corvette. He had a 71 Charger that a fellow I worked with bought. Graham bought the Anniversary Edition Corvette. Went to visit family 300 miles away for Christmas. It was right around -30F for a few days. He couldn’t believe how rough the car rode and cold it...

We have had/have 67 Chargers, non were two piece. All have been ABS. 66 Chargers we had/have are two piece fibreglass, same as other 66 b bodies which had end caps.

67 up were ABS.

In the 50’s we had other names for our Canadian built cars. Mayflower, Cranbrook etc.