Search results for query: *

At least you won't miss the exit this time. :thumbsup:

Same here

I looked at a '70 Challenger for sale locally the other day (Chevy guy) Original a/c car with no a/c vents in the dash. Hmmm..... I look at the VIN tag and sure enough, round pop rivets. I told the guy " Look, I could give a ****, but somebody is gonna light you up about those".

Any old gas I have gets mixed with used oil and, ahem, donated to Walmart.

Check your voltage at the motor when going up. I had a bad switch that was dropping 3v. Or, inversely, try running a known 12v directly to the motor.

Sorry about that, good to know though.

AR Engineering sold by Mancini https://www.manciniracing.com/maraendowca.html

I'd start with the grounds as well.

A few shots

Not an easy dent to fix (correctly anyway). No access to the backside due to the inner headlight bucket. Usually it's a slide hammer and copious amounts of Bondo.

If you have the old harness, make sure you pin out the new one against it. More than one M & H harness has had a few of the wires crossed right from the git go.

Funny thing is, years ago a restored RoadRunner would have been far more valuable than a restored Satellite. Now resto-mods have surpassed most restored "anythings" save the rare '71 Hemi Cuda convertibles blah, blah, blah. Buy the car you can * afford * enjoy * and will use Don't get hung up...

I've done the Dragon a few times, worth doing yes, but check out Moonshiners 28 while you're in the area. Much cooler ride IMHO.

I had Dave do two carbs for me, both came out excellent. I would not use anyone else at this point.

It's a long shot and not where I'd go first, but don't rule out one wrong length pushrod. A motor bends a pushrod and a frugal *ahem* mechanic grabs one out of the coffee can of spares. Unlikely, yes, but possible.

Drill baby, drill.

I'm seeing packs of 5 or 10 on a 3/8" washer

https://www.mcmaster.com/spring-washers/

Henry, I have a pair of usable dlp's for a '68 convertible if you need them.

A lot of grommets here, maybe match up something close. https://www.restorationspecialties.com/Rubber-Bumpers-Grommets_c_268.html?viewall=1