• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 5wndwcpe

    HP manifold gaskets

    This is exactly what I've been doing for years. I find it works well especially if the surfaces are not true.
  2. 5wndwcpe

    Exhaust Manifold gasket job 3838

    Remflex gaskets do work well but be forewarned, they're fairly thick and you might need longer studs if you plan on using the stock wire looms. I ran into this on my Sport Fury GT.
  3. 5wndwcpe

    Exhaust Manifold gasket job 3838

    The last motor I did I did I used high temp RTV and no gaskets. Follow the directions and wipe off the excess. No leaks and no worries, just a re-torque after a few heat cycles.
  4. 5wndwcpe

    bare metal preservative?

    I used Dry Graphite Lube from CRC on the manifolds on my '57. It's held up fairly well, but the car was stored in a damp garage last winter and a few rust specks were showing through. Nice thing about it is it's easy to touch up and doesn't burn off or discolor...
  5. 5wndwcpe

    Exhaust manifold mystery

    Never say never when Ma Mopar is concerned.
  6. 5wndwcpe

    Correct color for exhaust mainfolds-68-70 high performance manifolds??

    Actually they were painted with the motor, though that burned off in short order then they rusted. So the correct "color" is, uh, rust. That said, I've heard blasting them clean and then rubbing them down with powdered graphite gives a nice, fresh cast appearance that doesn't burn off. Full...
  7. 5wndwcpe

    Exhaust Stud stripped.

    Here is the installation tool, tap and inserts for less than $20 http://www.tooltopia.com/helicoil-5521-6.aspx?utm_source=nextag&utm_medium=cse&utm_term=HEL55216&utm_campaign=nextag_r1 You'll still need a 25/64 bit though.
Back
Top