Search results for query: *

I have 426 hemi rocker stand shims 060 thick,will sood have other thicknesses

was there any issues with the cover itself?

Thanx for all your info

ok,are all the timing chain holes the same where the button goes in,our hemi has a rollmaster,the old buttone was aluminum and it wore and ate the cover,I like anys cover,I think I may try your setup on ours,thanx for the info

On andys site he claims a 031 gasket will give me 010 clearance,if they make 022 on up they should have one to put me in the 007 range correct?

Thanx for all the input,not sure which route to take here

Thanx,im going to try to email him

no,i will be using the ar engineering cover that is stock thickness,they claim with a031 gasket my button will be at 010 clearance,I want a few different thicknesses to adjust it where i want it

yes

I tried emailing them and calling for 2 weeks now and no responce,I thought maybe they are out of buisiness

,Ill be buying and installing an ar engineering timing cover and roller button set up,wondering if andy is on here ,Does anyone know of any companies selling Mopar bigblock timing cover gaskets in different thicknesses,need any between 026 and 031 or either of those 2 thicknesses,if andy is on...

thanx doug

as I said before idont have a drive shaft yet and wont be getting one until I the proper yoke for my 1972 727 trans

i dont have a driveshaft yet,just need to know the proper length of the yoke itself or does it matter

We have a 1972 727 going into our 63 fury,does anyone have a pic of the correct trans crossmember for this application and a pic of the mount,will need to get both

Ive got a 1972 727 trans going in our 63 fury,ca someone tell me what slip yoke length it requires,we rae getting a forged unit,does te length matter?i see a few different lengths talked about and offered from suppliers,we also dont have a driveshaft yet so that doesnt matter,more worried about...

no you assume wrong,its the side to side movement and position,already read all that,talked to andy who says either the pedestal or rocker arm to be shaved

thank you

thanx,Ya I hear the crane golds are good for these heads,Ill have to find a good set

I have a set of 240 trick flow heads and purchased a set of COMP Cams Rocker Arm Kit 1621-16; Ultra Pro Magnum 1.5 Roller for B/RB Mopar Problem is either the rocker or the pedestals will have to be ground down to get proper valve alighnment,any one running a different set of rocker arms that...