Search results for query: *

I have an 18" piece of heater hose on the end of my gas can nozzle. ....

Wheel bearing

Looks really good Mark!

Is it vin locked or married to a vehicle that is the biggest question.

I think Chris birdsong on his YouTube channel junk her up has a video of him doing this exact task with just an engine hoist lifting the car body up.

73 400 2V nothing special. Sat outside with no cover and the valley pan rusted out. This is the second one I've had like this. Allot of work to get the cast crank out. Heads are toast. Heads bolt are going to have to cut off. Cylinder condition unknown but guaranteed to be rusty.

High rise do you mean tunnel ram or a dual plane? What's the rest of the engine combo? I would check engine vacuum to see if there's enough for the power booster to be effective.

That would be my first car that I had which was a 1973 Dodge Challenger 340 rally.

The bulge would look like this: Picture three is a steering shaft that came from this tube: Picture for I'm pointing to the pins in question and there is a lot of shaft that is engaged so to move it 3/4 of an inch wouldn't be too big of a deal. Was this converted or originally set up for a...

What kind of an EFI system computer are you running on your engine?

What are you using for a controller on your engine?

Did it bolt straight up or did you have to use an adapter plate? Or a special flexplate?

Did you have to modify your trans tunnel? Torsion bar crossover?

Logical Logistic Services Located in: FleetPride Address: 15777 Valley Blvd #D, Fontana, CA 92335 Phone: (909) 574-0626 Call Pam, this is direct to the owner/operator. no broker. great people to work with, covered transport. takes a little time but they treat the car like its your own. and they...

Connect an ohm meter to the case and terminal it should be 0 ohms or close. Shoot some air to the port and it should read open circuit at about 5 psi

And don't forget the flat washers.

72 RR I cut 14 ga into 3 sides at work and cut/formed to the floor pan. Took me most of a day, but the car is noticeably stiffer.