• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 6

    Need help with starter

    Read, study, learn, esp. at the bottom of the page!! Good Luck http://www.moparts.org/Tech/Archive/elec/1.html
  2. 6

    When to service the Radiator / Tranny cooler

    The cooling system is the most neglected system on all vehicles! It's your car, do what you want, but what does the book say when to service it????
  3. 6

    Oil pump not priming

    I didn't read every post, so I don't know if it's been said and you didn't say? Did you pack the pump with grease before install???? Good Luck
  4. 6

    Dip stick hole

    That's the ultra-rare, Mopar, dip stick delete option!
  5. 6

    440 Source heads ??

    Read the directions, what do they say? You probably will have to hog out the holes. Good Luck
  6. 6

    DOES ANYBODY HAVE AN OLD NAPA ENGINE PARTS CATALOG?

    What answers does a web search give you? Get creative with search titles. Good Luck
  7. 6

    rear axle gear noise , what to do , If anything

    You better not have cursed me with that comment, as mine are going on 20+ years now! I have to wonder if because the car is now being driven more now than when cr8crshr had it that it may just need some adjustment and nothing more? I'm just spit ballin here. Good Luck
  8. 6

    Lunati Cam/lifter went flat during break in

    So if you were to chart the RPMS. Are you saying it'd look more like a slow rolling hills country road when I'm talking about it looking like a EKG chart of a person on a treadmill. You got to bounce it all over the RPM range and quickly too. I bet that's the failure on your part!
  9. 6

    Lunati Cam/lifter went flat during break in

    Now for the million dollar question! Did you leave the RPM's at 2200 the whole time, or did you vary the RPM's from say, 1500-3000+? I will hold a steady RPM, but I'll also let it slip down to say 1500, then blip the throttle to get to a quick 3 or 4K RPM and then let it settle back down, then...
  10. 6

    Park cable removal tool?

    I have no idea what that is or what you're talking about? I just use one of these if that's your question? Good Luck
  11. 6

    Hughes vs Comp

    Which cam did you go with? Good Luck
  12. 6

    Hughes vs Comp

    I'm runnin the Hughes 2330 for the past 15 years, I'm happy! There's more than enough bad mouthing of Comp and they're bad products & shitty C.S. on this board, do a search. Good Luck
  13. 6

    Comp cam information please

    Here we go again! "Just because it looks good doesn't mean that it is!"
  14. 6

    Comp cam information please

    I say ditch it and get a Hughes cam. Good Luck
  15. 6

    Opinion on price of two 383's for sale on Craigslist

    That's the most lame duck excuse answer I've ever heard/read in my life! Ask him how he tells if a block is cracked or not just by eyeballin it, then ask hime what sonic checks are for? He's a Mopar guy that's been smokin to much cheeba, I'd offer half what he's asking or look for something...
  16. 6

    Keep it? Throw it?

    Why not slap some 440 source heads on it to bump it up? At least then you'll have matching heads.
  17. 6

    383 fuel pump push rod?

    Yes. Because. Good Luck
  18. 6

    Newly rebuilt 727 overheat issue

    Break this up into a couple paragraphs to make it easier to read! Good Luck
  19. 6

    383 cam selection mistake??

    As Steve Dulcich once told me. "If you're on the fence on what cam to use, choose the smaller of the 2, you'll be much happier"! Good Luck
Back
Top