Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If it were mine I'd blast it to see just how bad it is and lean more towards repairing the floor you have. I keep copper laying around just for this, huge help when it comes to closing up pin holes.
I like the poison myself, I put it where only mice can find it. Every winter they find their way into our attic so last winter I put piles everywhere I saw signs of activity, been mouse free since.
Went back and re read your post...:realcrazy: must have breezed through and overlooked the "INSIDE" part:rolleyes:. On that note good luck, my reproduction pieces are falling out too. I seam to remember cussing about how poor the quality and fit was on mine.
Really I think the #1 thing is for the glass to be installed at the right height. Outside of that just make sure the clips are clean of sealant, the lip on the trim is good and that the tang on the clips aren't flattened out.
Do you have everything already installed correctly as far as the wheel mounting goes? The one thing to keep in mind is the horn wire is a ground, it comes up threw the column isolated, pushing the button grounds it activating the horn. If your to the point shown in that picture you just put the...
I've got a Grant 3 spoked red mahogany wheel in mine. It bolted right in with their adapter and works very nicely. I'm not a fan of the cheaper Grants with the horn button issues but their better ones are really nice.
I've never tried it on a Speedo cable but I've had luck freeing up parking brake cables. I find a hose that can be clamped on the outside of the cable then attach an air fitting, fill the hose with automatic transmission fluid (high detergent and thin) then pressurize while spinning it with a...