• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Bill M

    71 RR 4-link question

    QA1 had a special at shows last year. they soften the price and no shipping.
  2. Bill M

    71 RR 4-link question

    Why the RMS?? similar price but i think the shocks are better on the QA1
  3. Bill M

    71 RR 4-link question

    SGH Have you made any headway in choosing a system?
  4. Bill M

    71 RR 4-link question

    Thinking of getting a 4-link rear suspension for the 71 RR project. Don't plan on racing but just maybe some aggressive street driving. No other reason than just for something more modern looking and adjustability. Mini tubed with spring re-location. Will be installing a modern Hemi driveline...
  5. Bill M

    Anyone use PirateJack booster and Master?

    I bought that unit when it first came out around 2012-13 Only complaint i had with the Unit itself is very sensitive. Barely touch the pedal and it is stopping. Like you don't feel the pedal on your foot sensitive. But i have not had a problem with it working. I didn't care for the vendor PJ...
  6. Bill M

    1973 dodge charger Mopar XHD leaf springs

    Did you need extended front spring mounts for those XHD leafs on your 71? Like on the 68-70 SS leaf's?
  7. Bill M

    B Body Super Stock Springs

    Put SS springs on my 68 charger. Slight rake and leans to one side. happy with them and didn't need to do anything special with the shocks. Just ordered KYB's
  8. Bill M

    Can someone identify this steering column

    looks like a 68 B body floor shift power steering column
  9. Bill M

    K-frame position

    Very good point about the upper control arm orientation.
  10. Bill M

    K-frame position

    i was hoping to loosen the k frame bolts and push/pull it back into alignment if that was the issue. Was'nt planing on removing anything just loosening the bolts like i said. dont got a frame machine (or the patience)
  11. Bill M

    K-frame position

    I tore down and rebuilt a 68 Charger recently. I found that the drivers side front tire was rubbing the fender (on the front) slightly on a suspension travel. Since the fender was the only part of the car not removed during the rebuild the culprit must be that the lower control arm is slightly...
  12. Bill M

    1971 Plymouth Satellite Torsion bar bolt

    HD stinks for bolts. Try a good hardware store or a industrial supply.
  13. Bill M

    WTB 71 Charger MC rienforcement plate

    thank you for the response but i found one at Dr.Diff
  14. Bill M

    WTB 71 Charger MC rienforcement plate

    Looking for a firewall reinforcement plate for a 71 charger manual brakes. original or aftermarket.
  15. Bill M

    Column change: manual to PS

    Changing a 71 B body manual column length to a power steering floor shift. I think the shaft difference is 3" but want to make sure. do i just cut 3" off the bottom solid shaft?
  16. Bill M

    brake distribution block

    Any pictures for a 71 Charger?
  17. Bill M

    brake distribution block

    Does anyone have a picture of a brake distribution block that identifys what brake line go in each particular port? have a 71 Charger with manual disk front brakes. Also is there an additional small block in line with the rear brakes?
  18. Bill M

    Pitman shaft seal retainer

    My mistake. I was talking about the idler arm foam seals. They kinda don't make sense either. I just received my new pitman arm this week. No washer with the new one and no washer came off the box with the old pitman arm. You must be talking about the style of rubber boot that comes with a...
  19. Bill M

    Pitman shaft seal retainer

    I believe what you are talking about is the foam seals that hold the grease from "falling out" .
Back
Top