• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Bill Monk

    Big Block Exhaust Manifolds

    I agree on the permatex 2
  2. Bill Monk

    HP manifolds questions

    Ceramic coating is the way to go if you want to keep them looking good. I talked to cuda chick about powder coating mine and she said it won't hold up to the heat, she would know.
  3. Bill Monk

    HP manifolds questions

    heat riser was to warm the intake on start up and also heated the choke spring to open the choke but they were problematic and most were wired open. I wouldn't worry about it unless this is a full 100 point resto
  4. Bill Monk

    Big Block Exhaust Manifolds

    I need to refinish mine, the front and rear studs/bolts go into the water jacket on both sides right or is it just the front?
  5. Bill Monk

    Purple Hornies ?

    Yeah, I debated back and forth a lot before I made the choice. I hate a drone and I don't care if it's loud, I don't drive it every day and when I do I want them to hear me coming. I like the magnaflows a lot
  6. Bill Monk

    Purple Hornies ?

    I went with a magnaflow 18146 and I like them. They are longer than the hornies though https://www.summitracing.com/parts/mpe-18146?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-magnaflow&gclid=EAIaIQobChMIuIjw9OGy2wIVUp7ACh3kIAagEAQYAyABEgK6BPD_BwE
  7. Bill Monk

    Mufflers and pipes

    I checked out the site but it says call for pricing, can you give me a rough idea what I would be looking at?
  8. Bill Monk

    Mufflers and pipes

    69 roadrunner so should have the room for pretty much whatever I want, right now it has duals with an H pipe going over the axle and out the rear with tips. I plan on keeping the same setup. The only reason I am replacing is that the car sat a long time before I got it and the pipes are pretty...
  9. Bill Monk

    Mufflers and pipes

    This is a street car, I should have put that on the original post. 440, 6 bbl heads ported and polished Purple shaft (hemi grind) 4 speed Dana 60 3.55
  10. Bill Monk

    Mufflers and pipes

    I searched the threads and opinions are all over the map. I want mufflers with the sound we have all grown to know and love, loud doesn't bother me. There is a big following for flowmasters but just as many that hate them. One thing I don't want is that annoying drone so give me your choice and...
  11. Bill Monk

    Antifreeze leak coming from header flange

    I've run into that with headers too
  12. Bill Monk

    Antifreeze leak coming from header flange

    Yes, and I use #2 permatex sealant on the bolts. U will need to drain at least the radiator, that should get the coolant level in the block below the bolt hole.
  13. Bill Monk

    Manifolds or headers?

    Interesting, thanks for posting
  14. Bill Monk

    Manifolds or headers?

    2 1/2 and use an H or X pipe
  15. Bill Monk

    Manifolds or headers?

    Manifolds, I like the look of headers but they are expensive and have issues you won't have with the manifolds
  16. Bill Monk

    Best Headers?

    Sounds like Dougs to me!
  17. Bill Monk

    Best Headers?

    440, 906 heads and a stock bellhousing
  18. Bill Monk

    Best Headers?

    You wouldn't happen to have a part number on what you are running now do you?
  19. Bill Monk

    Best Headers?

    Mine is a 4 speed
  20. Bill Monk

    Best Headers?

    Awsome, have you used either?
Back
Top