Search results for query: *

I am looking for a very nice set of 383/400/440 HP valve covers. There are no wire loom holders on the driver side. The passenger side has 3 engine harness looms and 2 spark plug wire holders on the intake side. The attached pictures show what I need. Let me know you have.

I am looking for a very nice set of 383/400/440 HP valve covers. There are no wire loom holders on the driver side. The passenger side has 3 engine harness looms and 2 spark plug wire holders on the intake side. The attached pictures show what I need. Let me know you have.

Let’s try 3671080.

Thank you. The pump is all I need…hopefully 3683834.

Thank you and you’re around the corner.

I am searching for a Chrysler 3683834 water pump. It was used for all 1972 and 1973 Mopar BB engines. I’m piecing together a correct 1972 440HP engine for my 1972 Road Runner GTX. Let me know what you have please.

I am searching for a Chrysler 3683834 water pump. It was used for all 1972 and 1973 Mopar BB engines. I’m piecing together a correct 1972 440HP engine for my 1972 Road Runner GTX. Let me know what you have please.

I am looking for water pump housing casting 2780987. There are a lot of these out there but I want a really clean piece with no heavy pitting on the neck. More specifically a part with the casting number on the passenger side and the date code and Pentastar on the driver side. Let me know what...

Does anybody have a scrap inner fender that they can cut the battery strap nut from? The nut somehow got knocked out of the inner fender on my car. I figure the nut and some surrounding sheet metal will do the trick.

Thanks for offering. How much if shipped to 48381? My original rear brake drums are damaged around the stud openings. I plan to heat the drums around the stud holes and use the scrap hub to flatten the surfaces immediately around the holes.

Thank you.

Does anyone have a scrap 4-1/2” pattern axle shaft? I only need the hub assembly with the studs. Need it as a pattern for some repair work.

You can also search referring to them as “boomerangs”. They are the same part as used for 1972 models.

I have one for $20 plus shipping. I had two, sold one to a guy with a 1969 Bee. Let me know.

Thanks for responding.

I am looking for a very clean water pump housing for a 1972 400/440, casting number 2780987. I would like to have a date code in March or April of 1972. I will consider January and February if the part condition is right.

If interested, uploaded some pics. I would recommend buffing the stainless and the ends need some tweaking (someone did not remove them carefully) but they are otherwise very nice. I am asking $75 plus shipping.

I had some time this weekend and confirmed that I have 2 sets of 1972 Plymouth canopy top stainless trim moldings. I am willing to sell the extra set.

I need to dig my other set out of storage to compare. Once I confirm I have an extra set, I will post some photos.

I am in Carlisle and bought an extra 1972 set. Let me confirm it against my other set when I return home if interested.