• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    Gauge steel of b bodies?

    I have a 66 Belvedere 2 door hardtop that the frames look good (I got the cowl) you come get it you can have it. 50 miles south of DC
  2. C

    Gauge steel of b bodies?

    Replace the car imo. On my 73 Barracuda it started with the front frame rail ended up everything but rockers and roof. I only used factory frame pieces
  3. C

    Time to paint, do I have enough?

    It depends entirely on type of spray gun you use. Old type HP sprays 60% into the air, turbine type HVLP 95% on the car! I painted my race car (70 Cuda) in 1-1/2 hours using same HVLP cup gun, base, pearl and clear. Bought Dupont paint, 3/4 gallon of base a quart of pearl and a gallon of clear...
  4. C

    Chroming.

    Been busy haven’t sent out yet
  5. C

    Chroming.

    $225 each for quote. I polish all my stainless and I do the assembly
  6. C

    Chroming.

    He said just the main outside frame with little foot at bottom. I sent a picture of what I needed done.
  7. C

    Chroming.

    I have the frame apart, don’t remember a rivet
  8. C

    Chrome piece on bottom of vent window

    I need a favor, can I get a length measurement on this piece off a 68-70 B-body to see if one will fit my 66 vent window. I think I saw where someone is doing a repo, thanks
  9. C

    Chroming.

    Has anyone used Librandi’s plating and how was his work? His pricing looks ok, out of Pennsylvania
  10. C

    Chroming vent windows

    Have one guy offer to sell me one for $300 but I need both so I’ll call these two places in PA Monday, thanks for reply’s
  11. C

    Chroming vent windows

    They did my bumpers, very nice. But after asking he said that’s all they do now.
  12. C

    Chroming vent windows

    Where on the east coast can I send out my 66 vent frames to get rechromed?
  13. C

    Painting

    I was looking for a top coat to shoot over the ‘work’ I have done to make sure it looks smooth and ready for the final coat with no prepping just shoot the final single stage paint. So if I thin it out a lot it doesn’t need sanding?
  14. C

    Painting

    It was supposed to be black sealer. Do you sand sealer?
  15. C

    Painting

    As soon as I get the Duster off the rotisserie the 66 goes on, Should be warm outside by then. Shop is heated too. i had bought this with the understanding from the paint guy that this sealer was to be used under the final silver paint. Now I’m glad I can do the fender and hood with this...
  16. C

    Painting

    Yep have all the good stuff, dummy me I could of saved all the trouble if I’d read the front label to see that it said epoxy lol
  17. C

    Painting

    Yes #175
  18. C

    Painting

    Here it is, what do you think
Back
Top