Search results for query: *

I'm sure it must be expensive, but I am amazed on the instant rust removal I have seen demonstrated online in some videos.

I don't want to use an electric pressure washer, just want to use my plain old-fashioned garden hose. Anyone use a sprayer with an attached bottle where I can add soap and have a water/soap mix come out the nozzle they have at home that can be recommended? Reviews on Amazon for most of these...

And how long was petroleum in the ground before being bottled (LOL)?

When my parents purchased their special order 383 '71 Road Runner when I was a teen, I asked the local mechanic to install a Stewart Warner vacuum gauge and oil temperature gauge in the dash. If I remember correctly, the oil temp took much longer to stabilize (warm up) than the coolant. I...

According to this recent MSN internet article it does. I know additives wear out and oil becomes dirty, but if I don't drive the vehicle for six months, I see no reason to change the oil. How is it going to become dirty or contaminated when it's stored? Should You Get Your Car’s Oil Changed...

What's with the cherry picker hydraulics? I borrowed one and it would not work until I refilled the fluid. Then I purchased my very own new unit and find it is leaking all over too. What seems to be the problem? Thank you.

Paint fumes give me a headache, not to mention the health hazards. Need to invest in some respiratory protection. Thanks for any suggestions.

I often struggle trying to keep the motor from turning over (torquing crank bolt, flywheel, flex plate) by sticking a bar or large screwdriver in places they don't belong. I had my local fabricator/welder make me up a tool to take care of that task for me under most circumstances. However, when...

A friend wanted help on his '91 Jeep Cherokee XJ with a no start situation. I heard the fuel pump kick on for a second or two when the key was switched on, but it sounded weak and kind of sick (not strong and fairly loud like they all normally sound). So I went to the local Autozone which offers...

I have tried the cheap/China ones at Autozone which cost about $50.00 and start to disintegrate after about a year after being both outdoors and indoors. I have tried the "Noah" custom fit cover which started to deteriorate after about 5 years after being mostly indoors and cost well over...

This one is only $23,999.00...

Advertised at $29.99 https://www.ohfuxiqr.top/products/100w-laser-cleaning-machine?fbclid=IwAR1TxgPoBbi5rv1JWjsa48puLFCw4EouO678aAJyQgTECLIjVh2_RJH6TAU

Comments regarding the video claim the presenter is trying to drill a hole in reverse (I can't tell which way the bit is spinning).

Probably posted here just trying to remind myself not to let it happen again.

I changed out drill bits four times and still could not perforate a hole in a metal battery tray bracket. Half-way through this exercise, I checked to make sure the dual-purpose drill was set on "drill" and not "hammer". At the point of believing all the drill bits were dull (and I had been...

I guess one question would be: does a solid lifter measure exactly the same as a hydraulic lifter not compressed?

I need to do this pretty soon.

Vintage Livestock Ear Notching Tool?

Just found an advertisement this AM, don't have any.

Look handy.