Search results for query: *

You will need the glue on caps. Heat gun and the stickers will come right off............pull them off slowly or else you will have to peal off the stuck paper. Follow up with wax and grease remover.....save the stickers on a piece of cardboard for warranty if/when needed. I got my kit in...

426 1969 HEMI NEED TO SEE PICTURES OF A INSTALL FOR THE msd BOX IN A 69 BBODY The one in my car is mounted p side fender well near the horns. Just does not fit right.

AT LEAST HE DID ALL CAPS; YOU HELD DOWN THE sHIFT KEY ONCE......LOL

If you can't afford a NOS switch then you should not be restoring a Mopar.

BUT a friend of mine got one and just last long 3 months what?????

My (Orange) went bad a month ago went to Advance for a blue box Less than $25, Installed it and it was like I did a major tune up. How long it lasts is the question.

Wards Classic Car Radio repair. Huntsville Al. Excellent job and quick turn around.

The new conversions require new modern speakers.

NO!!!!!!!!!!!!!

I just put in a 27 yesterday in my 64 fury, fit perfect. group 24 - 10.3" and a group 27 = 12.1"

Fresh engine new everything under the hood. Amp works fine the temp and gas are the ones not working.

Thank you Is there any way to test the temp sender on the engine?

What was it? Same problem on my 62, gas and tem gauges do not work. Limiter is fine, but what is the condenser for?

I'll double check, thank you

I had the same regulator on both. No difference.

First one was a square back and the 2nd one was a 66 two pulley round back reman from Auto zone (duralast). regulator was not an oem not exxex, mounting holes were different. Shop manual shows 3 hole mounting and the one that was on it and all of the ones I have are two hole mounting. Step 5 in...

Struck out. On my a100..........changed to a new voltage reg, and replaced the alternator with a new one and the OLD new one seemed to be okay too! I checked the resistance from the field from the alt to the volt reg and it was fine. I did notice some cracks and brakes on the ground wire but I...

Where do we get the new style reg?

My 64 was doing the same thing I put in a new high out put Alternator and the problem went away. I told the same problem issue story to a vendor at the York Street rod meet last year. Bought one of his alternators and no more problems. I did have to run a jump wire to make it work properly, but...