• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Huicho417

    Drum to Disc conversion master cylinder power booster plate removal installation

    Its very difficult to get to them but they can be accessed without taking anything off. I did the conversion with a brake kit from CPP and was able to remove them. One issue you may have is when you go to turn the nut depending on how tight they are it may turn the bolt with it. There is not...
  2. Huicho417

    Borgson steering box question

    Sorry meant to send this one.
  3. Huicho417

    Upper control arm replacement

    I have been doing research on this and seems like the QA1 tubular is the best option.
  4. Huicho417

    Brakes

    I got the master kit for my 67 Coronet from Classic Performance Products. It came with master cylinder, booster and spindles to make it all work. The booster clears everything in the engine bay, however I would double check on your car. Only thing I recommend is to get new pads, the ones that...
  5. Huicho417

    Power steering pump

    I did a TRW and it was very easy.
  6. Huicho417

    rear disk brake conversion

    Hello everyone, I just parked my 67 Coronet because I will be removing the leaf springs and 8 3/4" rear end assembly. I want to clean it properly add new bushing to the leaf springs. As well as seals, gaskets and bearings to the rear end. In here lies my question, while I have this assembly...
  7. Huicho417

    CPP front disk brake conversion

    The size of the brake booster did not conflict with anything else. It also allowed me to keep the stock firewall bracket and was a direct bolt on.
  8. Huicho417

    CPP front disk brake conversion

    It's all good fellas, this site has been great with the progress of my project. I cannot thank everyone enough for the amount of hours ya'll have saved me. Probably a good idea to go ahead and reorganize the wires anyways. Although, I have had to do some alterations due to the bad carburetor...
  9. Huicho417

    Steering pump shaft seal installation.

    I recently rebuilt my TRW Chrysler power steering pump with new o rings and seals. The first time around I got the wrong shaft seal that was too large in the inside diameter. Lost all the fluid when I first started the car. Today I found and purchased the correct one, but I’m afraid I may...
  10. Huicho417

    CPP front disk brake conversion

    Hello to all, I recently did a front disk brake conversion from CPP on my 67 dodge coronet with stock 318. The car was manual brakes. Happy to report that it all went good and looks great. I am having issues locating where the line from brake booster would connect to on the intake manifold...
  11. Huicho417

    Power steering pump pulley

    While I was restoring the power steering pump for my 67 coronet I accidentally dropped it and bent the pulley. Anyone know where I can get a correct replacement? From the research I have done it is a Chrysler TRW (Thompson) type. Thanks in advance.
Back
Top