• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Jerry Hall

    Headlight vacuum actuator question

    I have only worked on these when I restored my Superbird, but neither had a bend in the actuator rod.
  2. Jerry Hall

    1968 Charger Sway Bar Dilemma

    $49 at Jegs part number 515-23366
  3. Jerry Hall

    Engine painting 1969 Charger RT

    I like the stock appearance, Hemi orange it is. IMO
  4. Jerry Hall

    68 hemi charger

    What, a 68 Hemi Charger and no pictures? Best of luck in your quest for documentation.
  5. Jerry Hall

    Not that it matters….

    More than likely, especially since the color under the black is yellow.
  6. Jerry Hall

    Bucket list car - 1968 Dodge Charger

    Welcome from Alabama, nice Gen II Charger.
  7. Jerry Hall

    68 Charger R/T at Mecum

    When you pass someone that they know it's a Mopar.
  8. Jerry Hall

    Mopar shock absorbers 2206 509 rear

    NOS Mopar # 2240358/ 2206509 Rear Shock Absorber Dodge 880 & Chrysler 1962-63 | eBay
  9. Jerry Hall

    Are the Hemi exhaust manifolds I have "right" for my 69 Charger?

    The right side not being drilled for the heat tube may be a reproduction. I'm not sure what dates were available on the reproduction parts. I have a reproduction right side Hemi manifold that I can look at tomorrow.
  10. Jerry Hall

    Factory spare wheel and tire

    This is what a 67 looks like in the trunk. Somewhere I have pictures of the Superbird trunk area, but I can't find them right now. If you have an original or reproduction trunk sticker for your car, the layout will be shown. Also reference a service manual or owners manual.
  11. Jerry Hall

    Factory spare wheel and tire

    On the 67 the redline was was down, because the jack base and jack hook are in the dished side of the wheel with a threaded hook and a large wing nut. Then a spare tire well cover goes on and with a cup with a small wing nut securing it. On the 70 Superbird which would be more like a 69, the...
  12. Jerry Hall

    Factory spare wheel and tire

    If 67 and 69 are comparable, my original 67 GTX has magnum 500's, and the spare is a steel wheel with red line tires on all 5. My Superbird came with 14" Rallies and the spare is a steel wheel with the same RWL polyglass tire.
  13. Jerry Hall

    Exhaust Manifold Treatment

    A lot of guys on here don't like POR 15 products, but I bead blast my manifolds and use their cast blast brush on coating. Once the engine is cranked the manifolds will smoke and cure with the engine heat. The manifolds on my Superbird have been done for 23 years and still look as good as the...
  14. Jerry Hall

    70 Charger Hemi 4sp

    You snooze you lose. You sure let that one get away. I paid almost 20 grand more than that for one of mine in 2000.
  15. Jerry Hall

    Phoenix Graphics application gel

    Is your garage heated? If so just leave it alone for a few days. If not I have had success with a pin and pressing carefully. Also you can try a hair dryer. A heat gun is to much.
  16. Jerry Hall

    $40,000 BIN! OK.

    That's not even a 8 3/4 under the car.
  17. Jerry Hall

    $40,000 BIN! OK.

    Dreamers hoping to find a fool.
  18. Jerry Hall

    Why is my 426 hemi stamped marine

    It's spelled out in the service manual that the maltese cross is 10 undersize.
  19. Jerry Hall

    Why is my 426 hemi stamped marine

    I think all stampings other than BH 426, 2-28-26, and the maltese cross came from somewhere else.
Back
Top