• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. M

    Tremec TKX 5 speed vs. A-833 4 speed....

    What is the most cost effective option? I'm running 391's and would love a affordable overdrive
  2. M

    First start with new cam/ heads won't stay running

    You may need more intitial advance, went through the same thing with a 284/484. W more advance, you can back the carb down to the idle slots. However, the dist needs to be modified to not go over 36-38 degrees total
  3. M

    Rough Idle - Edelbrock Intake

    I drill a 1/2 hole in the plates, quicker warm up
  4. M

    No oil pressure

    And careful, when pressure builds, the drill will buck real hard
  5. M

    Fitting '65 727 TO '71 440

    Woops that's what I meant, using a cable shifter or adaptor kit?
  6. M

    Fitting '65 727 TO '71 440

    I believe 65 is a pushbutton trans, or no?
  7. M

    489 suregrip. Thrust button missing?

    I cleaned the vent, and dropped the level, seems to be working
  8. M

    Am i in for a transmission rebuild?

    Also, I've had lube guard work miracles, some manufacturers use it
  9. M

    489 suregrip. Thrust button missing?

    Yes, lubed and national brand. I've been reading the level should be 1" below the hole. I wonder if that and a plugged vent is causing it
  10. M

    489 suregrip. Thrust button missing?

    Any tips on installing the inner seal? I put it in square, all the way back, and was careful putting the axle in
  11. M

    489 suregrip. Thrust button missing?

    Well, went for a test drive, axle quiet, but can hear those gears a bit However, the driver's Axl seal is now leaking..... It was a new national seal, didn't replace outer seal or bearing. Adjusted the axle for tiny bit of play also,.....great
  12. M

    489 suregrip. Thrust button missing?

    I just bought this car, and a bad axle bearing, that's why I took it apart. I'm gonna ride the gear set as is, while i look for affordable 355's. It actually was quiet driving, just the axle bearing was toast
  13. M

    489 suregrip. Thrust button missing?

    Ugh, a 3 year old could not turn it, looks like I'm going to 355 sooner. No idea how old, just bought the car
  14. M

    489 suregrip. Thrust button missing?

    Not really, but teeth look ok
  15. M

    489 suregrip. Thrust button missing?

    Also, supposed to be 391, this is the only marking I can find
  16. M

    489 suregrip. Thrust button missing?

    I can,only by getting it going using a screwdriver, then turns good until I stop, I could be weak...
  17. M

    489 suregrip. Thrust button missing?

    Also, how hard should it be to turn the gear set out of car? I can't do it by hand, but could with drive shaft connected
  18. M

    489 suregrip. Thrust button missing?

    Putting new axle bearings in ( not green). I read the trust button pin breaks, I don't see any, what's the deal?
Back
Top