Search results for query: *

You would honestly think someone would make a correct working non crap sender . I've emailed Tony and a few other suppliers and said if it worked you'd sell thousands and if it was a guaranteed fix I'd even prepay to help tool it .Tough to even find a rebuild able core . As it stands I fill up...

Good points on needing to bend the arm I also think the ohms are off when received . They can be corrected but it's a pain in the *** . I'm waiting till spring .

Unfortunately no one makes one that works yet . You have to bend the arm 800 times to get it right or do as I do , fill up at a quarter and realize you have an 8 gallon reserve ...

Try this trick first used to happen to me all the time with an Edelbrock carb .Easy fix then after do the next steps people have mentioned these carbs get dirty . Make sure your timing and idle are set first . Car not running There are two screws at the front of the car -air idle screws ...

To be honest I've never checked and don't want to know it's a toy . I do know every drive even a short one is at least 20 . Just keep filling it up .

That's what I've usually done with the stabil . Thanks

Do you fill the tanks to full and mix a bit Wih the gas to not let ethanol gather moisture ?

It's almost time to put the car in the garage for storage so I'm asking what's best to store . I've always used stabil but hear conflicting advice . Do you fill the tank all the way full with stabil in it to deter rust and tarnish or Have a lower level and stabil ? Thanks Pete

There is a great tuning video on line from Edelbrock on the carbs . Spacer is a requirement for these for heat soak . Also in the front there are two screw for air adjustment .Screw them out wipe the screws to get them clean then blow pressurized air down the hole they came from . Screw the...