Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Actually if it's an issue of sealing it's better to mill the intake surface of the head. That way if you are swapping intakes like the poster is doing they always remain stock, can be used on other builds and sold as a stock intake..
DPCD was Dodge Chrysler Plymouth Desoto but Desoto disappeared in early 60's so while they kept it, it may have became Dodge Chrysler Plymouth Division...
You can use a pvc pipe it picks up harmonics great. Start the engine and position it on top of the valve cover and work your way down the cover. If it indeed is something in the valve train you will hear it easily. Could just be a rocker out of adjustment depending on what's in it Hydraulic or...
It will work just fine if that is all he has. You just need the spacer for it. Many places carry it.
Fit For Mopar Dodge Big Block 383 440 Distributor Adapter Kit Billet RB 413 to B | eBay
Drive shaft could have good joints BUT it maybe out of balance itself. I had this similar experience recently on my 2017 Ram 2500. Turns out a poorly welded washer that balanced it had rusted and pushed itself off. All that was left was a small part of the weld. Thankfully it was still under the...
I used a later issue factory cross member and mount. You just have to cut the ends down as they are to long as the hole spacing is wider on later b-bodies. Once cut to the same length slice the vertical sides a little until when pressed up the inner holes line up, mark & redrill the outer holes...
GER was made not far from me down in Oxford Pa. They had some of the best equipment to make convertors from what I was told by other people but only a few knew how to make them. Literally they were hit or miss. I had 3 of them and 2 were great and other would not even go onto the front...