• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. R

    70 Superbee Center Hub Too Short

    Get some weld wheels, they have a large center hole. Those 15x8 steel wheels are about 32 lbs each, kinda kills the performance of any car. thanks for the explanation on the hub/hole fit.
  2. R

    70 Superbee Center Hub Too Short

    Lug nuts are a fail. Are they bottoming out on the studs? Get some open end stock lug nuts and go from there.
  3. R

    Cowl Vent & Windshield Weep Holes/Drains

    There are drains in the windshield channel the empty inside the cowl. LOOK at your car. So filling the drain holes is not good. None of this suggested project is worthwhile IMO. Leave it alone.
  4. R

    1970 Roadrunner front alignment "specifications" to prevent "tracking"

    What size and compound tires are you using? Front and rear. Rear soft compound drag tires? Radial or bias ply? How wide are they, this will affect your problem. Are those numbers after they aligned it or before. Looking at those number the car won’t drive very good. What type of driving...
  5. R

    66/67 Charger wheel opening on 66/67 Coronet

    I have seen that on several cars over the years. It just doesn’t work and it looks bad in person. Very bad. Discussing this with others there and it was just about a unanimous dislike for this modification. Keep in mind this is at a mopar car show and most folks there like stock original...
  6. R

    Wilwood front disc brakes only compatible with DRUM spindles??

    You cannot rewrite what fits, go buy some drum spindles and move forward. The right (wrong) stuff needs different (specific) spindles. Wilwoods fit stock drum spindles. These are different spindles, no matter how bad it hurts you.
Back
Top