• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. RJS

    Need quick help against vin fraud. Hamtramck

    I like checking the trans. also supposedly same guy same stamp so both should be like that. Ron
  2. RJS

    Off idle stumble.

    Very cool, if I can ever be of help just ask. There is a lot I don't know but I'll give you the 2 minute tour to what I know anytime! Ron
  3. RJS

    Off idle stumble.

    yes sir, in gear, brake on, tires locked, and vacuum advance unplugged but carb. port for it plugged and after you get best/highest vacuum reading on each side or all 4 if you have 4 corner then reinstall vacuum advance and you may have to actually lower the idle screw
  4. RJS

    Off idle stumble.

    Please answer my last question that I PM'd you with either here or in a PM and we can make this throttle response perfect with just a little more. Ron
  5. RJS

    Off idle stumble.

    Your last entry talks about stomping the throttle when you get the stumble. If that has beed the case the whole time yes the stumble can very well be rear of carb. and req. a spring change in the sec. canister. When you are doing your idle adjustments with a vacuum gauge proper is to check...
  6. RJS

    Off idle stumble.

    Give the car more initial as others have stated but please do this: ↑ When I bought the car 3 years ago the PO had an Edelbrock 600 on it. I put the 750 on and checked to see that the accelerator pump linkage was contacting the pump, but not necessarily preloaded. I'll try that. I think the...
  7. RJS

    Off idle stumble.

    I don't know what this PRELOADING is all about but it's wrong!!! With engine off have someone open throttle full and hold. Do this at the carburetor to insure full throttle!!! You now take a feeler gauge and see if it will slide between front pump arm and the pump adjustment screw. Holley...
  8. RJS

    Valve cover identification

    They are 1971, the passenger side (one with two openings) can be passenger car or HP but the driver side due to that extra wire holder at rear tells me NON HP. Ron
  9. RJS

    66 Satellite spare tire holddown?

    I just deleted the post because I put it in the 66-67 section. But thank you that is what I thought Ron
  10. RJS

    66 Satellite spare tire holddown?

    deleted
  11. RJS

    66 Satellite Gas tank parts list

    I found a reproduction set on EBay that I just bought hope it all works out! Ron
  12. RJS

    66 Satellite Gas tank parts list

    Do I need this piece too??
  13. RJS

    66 Satellite Gas tank parts list

    This hose kit is going to reach the tank or do I need another part?
  14. RJS

    66 Satellite Gas tank parts list

    Just got my 66 Satellite and need to put in a new tank and want to make sure I order all that's needed. Car had a cell in it that I'm eliminating and going back to stock parts. So I have to buy a tank and sender, hose kit from filler (looks kinda like a radiator hose and then two smaller hoses...
  15. RJS

    71-72 air grabber bubble and door alternative?

    That is probably the Stinger Brand bubble that says glue on. It has the bosses that can be tapped and studs installed per factory. Note that AG hoods were very heavy and the Stinger version is heavier than stock. Ron
  16. RJS

    Ram Charger Hood

    Take the yellow hose off the solenoid and put it on back of switch where the short jumped hose is and that will eliminate the solenoid.
  17. RJS

    P4532098 camshaft???

    Thanks Nacho, that's why it was so docile. 115 CL
  18. RJS

    P4532098 camshaft???

    Thanks but really need specifics on this cam. Ron
  19. RJS

    P4532098 camshaft???

    I just took this 3 bolt cam out of my 383 and can't find any spec's for it on the net or any of my old books. It's a 3 bolt hydraulic and sounded very stock. Thanks Ron
Back
Top