Search results for query: *

All fixed thank you! Happy New Year.

Yes it was being grounded out at the horn button on the new signal harness on the back side. It was touching the housing. A little piece of electrical tape fixed the problem. Thank you so much! I guess I was just over thinking the problem. Happy New Year!

Yes it was being grounded out at the horn button on the new signal harness on the back side. It was touching the housing. A little piece of electrical tape fixed the problem. Thank you so much! I guess I was just over thinking the problem. Happy New Year!

I have a 1971 Dodge Charger and just replaced the ignition switch/harness and turn signal switch harness in the steering column. Both were plug and play.The turn signals, hazzards, ignition works great now. It all went in with out a hitch, but now when I hook up the battery the horn is...

Thank you you all for the great advice. Running well now.

Thank you for all the advice.

Thank you it ended up being just what 72RoadrunnerGTX said. Runs/starts great now. Thank you

Yes- got it sorted. Took 72RoadrunnerGTX advice and it runs/starts great. Thank you.

72RoadrunnerGTX- Did what you said and it works like a dream. Runs and starts perfect!!!!!!!!!!!!! Thank you!!!!

I am working with MSD pn#8386. I removed the original ballast per MSD instructions. All I have now is the voltage regulator with the blue wire and a green wire. The blue then goes to the alternator middle post and the green goes to the top post. - DO I put the brown with the blue prior to...

Thanks you. So there is supposed to be power to the coil when the ignition is just in the ON position?

I checked past posts that come close to my problem, but still haven't found what I need? I put in a MSD ready to run. I removed the ballast resistor, the orange box and wired as the instructions show. The engine won't stay running after I let go of the key! After starting the engine if I hold...