Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The least amount of work would be to cut a channel on hanger tab to where the bolt goes, slide it around the bolt & hook it in. There's enough of the bolt out to do that. Right now it's a low priority project & not visible.
Thanks guys. Love the ideas. Is there an epoxy that I can shoot up there & then pull down on to seat the nut so that it's in place that will handle me unscrewing?
There's enough of the bolt out that I could probably get someone to weld the bolt & nut, zip the top off the bolt off & then get a nut and tighten it on from there.
I was leery of using any heat so close to the tank, not that it's not leaking. Some penetrating oil got on my handle & I lost my grip. The socket was uneven for a split second when it happened. I was in a really uncomfortable position as well. The bolt spins freely.
Friday night installed the exhaust tip hangers that I bought from a fellow member here.
Earlier in the week spayed the bolts down with penetrating oil to soak in. Took my drill wire brush and took off the undercoat & rust. Got the 1st bolt unscrewed & hit it with more oil & screwed it &...
Hey guys, just wondering if my exhaust tips are missing something as the bars at the top look like something should go there. Also what if anything are these bumps for?