Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Total removal and reinstallation would prolly not be possible . 50 years of heat and time usually weakens the threads at all the seams. You might be lucky enough to just release the first section enough for repairs and get it put back if not much pulling is done. If you can get it back just...
As far as repairs go, I have gotten pretty good using the plastic gun welder on some cracks, if your plastic is thick enough. Nothing more than soldering gun with tips for melting in the little zig zag wire inserts. As for plugging holes, it has been discussed here many times. Put a few small...
Being a newbie to Mopars I cannot answer your question with any authority. Others on this site can. But, I believe it would have been a low gloss lacquer from one of the big three paint makers at the time. When I updated my beater to driver statues , I did not want to pay $100 bucks for a pint...
My friend had a car rental business for many, many years, bought hundreds of new cars for his lots. Said his number one rented car was anything white with a red interior, number two was anything white with blue interior. Love them red interiors......get one.
Not knowing your exact cover needs I would guess Legendary would be a the top of the higher cost mail order companies. I have used their products and found them to be top notch. But, I was not doing a concords, OEM, dead exact restoration either. I have used PUI on some replacements and was...
Guys, its time to purchase some replacement rubber seals, doors and trunk. When I purchased last, years ago, there was only A M Softseal and Metro. I have used them both but preferred one over the other, but can't remember which one. Are these still the only two choices we have and is one...
A cheap get by I have used. If your foam is good, meaning , its all there just flat or compressed, most upholstery shops have a material on a 36 roll that is about a 1/2 thick , grey, and looks as if its made of reprocessed capet. Not sure what they call it. Buy a yard or two of that and cut...
Steering column has been removed , cleaned off the crud and found the four hex head screws in the dash vents. Pretty sure I will pull the windshield at some point and I think that will aid in the dash coming out .Dang these simple projects just seem to expand once you start to pullin stuff...
Ok, great, are the top screws philip heads or bolt heads. And I suppose there are four of them. Were you able to pull the dash out of the car by yourself or is that a two man crew thing for sure....thanks
Guys, got the engine/firewall bay stripped and heading towards repaint. Noticed the dash and components looking rough, broken and needing much attention. Found some u tube vids on a 73 Challenger which showed removing 4 bolts in the top vent area and loosening the two bottom side bolts and just...