• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. chargervert

    Does anyone know what the factory pinion angle is for a 71 Charger R/T Dana 60?

    The rear axle is coming directly from Strange. I am aware of the offset.
  2. chargervert

    Does anyone know what the factory pinion angle is for a 71 Charger R/T Dana 60?

    I am going to order a new Strange S60 rear axle for my 71 Charger R/T. Someone robbed the original Dana 60 out of the car long before I owned it. I want it to be as close as possible to a factory Dana 60. Does anybody know the factory pinion angle on an original Dana 60 for a 71 b body? Thanks Pete!
  3. chargervert

    Installing green axle bearings on a Dana 60 ?

    I am going to be installing a pair of green bearings in my Dana 60 and installing rear wheel disc brakes. When using green bearings, do you reuse the flange with the adjustable lash for the tapered bearings,or swap it out for a non adjustable flange like the one on the drivers side.? Any input...
  4. chargervert

    70 440 HP 2 engine,cam question.

    I can feel the pitting with my fingernail, Nate.
  5. chargervert

    70 440 HP 2 engine,cam question.

    My friend has a 480 284 cam and lifter set that he put in his 383 Dart GTS, and he decided it was a little more radical than he wanted so he swapped it out with a purple shaft Magnum restoration cam. He said that it has about 2k miles on it. He said that I can have it if I want it. He numbered...
  6. chargervert

    70 440 HP 2 engine,cam question.

    I figure I can get a cam and lifter kit,and a fresh set of valve springs for about $500.00. For what I paid for the engine,I got room to spend a few bucks on it!
  7. chargervert

    70 440 HP 2 engine,cam question.

    I picked up a 70 HP 2 engine,it was rebuilt,and appears to have decent quality parts in it. The guy I got it from had stored the engine in his garage for a few years with no intake on it. The mice decided it was a good place to make a home out of,and they made their nest there. I vacuumed out...
  8. chargervert

    Anybody know the NAPA pilot bearing part number?

    Als rapid transit is still listing them on his site,so I will try to get one from him. Thanks everyone for your help!
  9. chargervert

    Anybody know the NAPA pilot bearing part number?

    Napa used to sell a pilot bushing that was slightly undersized to use in crankshafts in automatic cars that were drilled from the factory,but weren't final drilled for factory manual transmissions. I had bought them on several occaisions,does anyone know the Napa part number for these pilot...
  10. chargervert

    Why is the 426 Hemi better than the 440?

    Now a days they make much better flowing cylinder heads for the B and RB engines, so in street form,they can be relatively close in horsepower and torque, but in race form is where the Hemi design really shines,and with modern roller cams,they have much more drivability,and stay in tune much...
  11. chargervert

    Four speed conversion

    NAPA had a pilot bearing made to fit the automatic drilled crankshaft.
  12. chargervert

    1967 440 HP Engine

    My friend has two of them,one auto,one 4 speed.
  13. chargervert

    Turning a 383 into a real hemi?

    There is no such thing as a cheap Hemi! Believe me know!
  14. chargervert

    HP and HP2 what is the difference

    I was selling a tunnel ram dual quad intake manifold for a 440,and I offered it to a guy that had a 73 Plymouth Fury,that he said was a former cop car. He told me it wouldn't fit,because his 440 was a special police 440,and it was bigger than the 440 in my 70 Charger R/T that I had the intake...
Back
Top