Search results for query: *

Where is the best place to get replacement hinges for my 70 RR

I actually ment, do I paint where the gaskets would rest against the heads.

I have a new set of 440 Source hesds that I need to paint. I'll be using a good primer & then high temp paint. My question is, do I mask off the intake & exhaust ports before painting ???

Hi Moes, another post asked if the window needs pulled. Or can it be done with everything in place. I just got my new ones & have not done them yet.

Thank you.

Thank You. Do the old ones just pull off. And the new ones get glued to the old parts?/

Not sure what these are called. 70 RR hardtop. The Moulding that attaches to the front driver & passenger windows that go up & down with the window. They seal the front door window to the rear door window. Mine is pulling apart & I want to replace them. What are they called & where can I get them.

Does anyone reproduce the wiring clips that hold the turn signal wiring in the hood. The hood has the lights in it.

I'm going to have organasol sprayed on it. But my original question goes to did all the other plants use it on the Roadrunners & GTX's.

What paint did the other plants use for the hood treatment ?

I've been told cars from the Los Angeles plant ( 70 Roadrunner ) came with organasol hood paint treatment. With a repaint coming, is that true. Or what other paints did they use ?

Going to have my 70 RR painted. I am going to replace all the door & truck seals. Also the window whiskers & front windshield gasket. Who has the best replacement products for those items?? Chuck

I wasn't sure to remove just the bumper or if removing it with the brackets was the easiest way. The bumper has no dings or dents. Just very bad chrome.

I have a 70 RR. I'm replacing the rear bumper. What's the easiest way to remove it & should I rechrome it or buy a new one?? I've called a rechromer & they want $850 for it. Or what does a aftermarket one cost?? And who should I buy it from? Thanks Chuck

Looks like the frt of the window is rubbing the whiskers too much. How do I adjust that? Chuck

The Dr side window had a larger gap at the top rear rubber moulding. I tried to adjust it & everything got out of whack. Right now if I try & roll the window down. It has a lot of resistance to it. Chuck

I have a 70 RR. I needed to adjust the driver side window & really messed it up. It had a big gap where the frt & rear window meet. Now it's so far out, it's hard to roll up. Is there a simple procedure to get everything lined up correctly??? Chuck

Just to let anyone who has the same problem as I did. So far Armor All & a detail brush seems to work perfectly. Chuck

I've tried the windex & that didn't work. A friend suggested Armor All. So far that is working. I just don't know if that is masking the wax or removing it. I'm picky when waxing the car, but a little got on the edges as I waxed it. Chuck

70 RR with the organasol hood stripe. I need a way to removal the over zealous wax job I put on last winter from the stripes. The wax is only on some of the stripe. Chuck