Search results for query: *

Ok, never been to that one

That the one in Clay City ? I used to go every year. but havent in some years now. so cant say for sure if its worth a 7 hr trip

I have one car with 3.54 Dana and a 2nd car with 3.91s Both cars have a 2.45-60-15 tire I will go on record. 3.91s suck for anything hiway speeds related. BUT are A LOT of fun around town driving. They are about to drop to 3.55s or maybe ,just maybe 3.23s Im picking up a center diff (s)...

This looks good

This makes for a nasty rip up thru the tail gate trim on your shiny SLT tail gate trim panel , ( dont ask me how I know )

Ive always tow with the loaded vehicle in park ( or gear on manual trans ) And always crossed the straps. Always use the double wrapped axle straps on both ends last trailer I had . I had boards screwed to the deck to give the car a bump stop so to speak . Works like a charm to help prevent...

Sweet, and consistant low 11s aint no slouch

My favorite bar none https://www.serengeti-eyewear.com/us/

This is always been my rule of thumb. Anything over 50 at hwy cruising speed is pretty much redundant ps, My street hemi has a light that goes off while cranking , worst case immediately at start up and I have no idea what it has for pressure ( I may ck it this fall just to satisfy my...

I tried the US car tools , once in a 1970 Cuda I did . When it came to routing brake, and fuel lines and emergency brake cable system was a royal pain No thanks. the next time I made my own Going off memory here so bear with me. I think I used 2 x2.5" box tubing . I think they were .080...

The one I have is 24.5" overall length its NOS and the OEM pt number is 4088095

I have a throttle cable for a truck that might be about that long. I know its a good bit longer than the stock one on my car I can dig it out tomorrow and measure if someone wants it

No idea material they are . Havent had the drums off yet. But odds are the are NOT SM shoes Ive had enough drum brake cars over the years. Its only a matter of temp when they fade. Regardless of material

My car has manual 4 wheel drum brakes. It stops it fine. BUT,,,,,We have some mountain drives around here and drum brakes are fine,,,,,all the way up said route and ,MOST of the way down its all the partial braking ( and there are lots of it ) is when it becomes a problem at the bottom...

I will have to look into this style head gasket maybe. Mine is approx 11.5 -1 and would like to get in back down in the mid 10 - 10.5 range if I could. Previous owner told me it has OEM steel shim head gaskets on it now