Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well got the motor to run and she sounds good.. problem was well embarrassing.. my dad and I did not take the car a part so we went off the other guys duct tape labels on the wires... turns out the - coil wire was not hooked up we had the tack hook up like it should be... well put the other...
Ordered a distributor figure that has to be it I get no attempt at turning over at all and I have voltage upto the replaced coil so that's good... if not the diz then back to the drawing board haha
Ok replaced ballast resistor still no spark so new ignition box new ballast and no spark still crank crank crank... will the neutral safety not being hooked up affect this no start situation???
thanks got a new ECU and nothing so I will move to the ballast resistor and last the distributor. My buddy checked the coil and we even swapped it out to make sure but hell ya never know both could have been bad.. Like I said all crank no spark... Thanks for all the help if ya think of...
Need help motor will crank like hell but no spark at the plug I didn't take it apart but dad and I put it back together and like I said crank like hell won't even try... pulled number one out set TDC and cranked again nothing pulled the plug and don't see any arch on the plug.... any info is...