Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's a good start, Thanks for the photo. I will have the post car in the shop shortly to replace the motor and trans. I will take a closer look to see where it needs to be cut.
unfortunately not too many salvage or wrecks in south Florida. I will keep looking on the forums and craigslist for parts and pictures.
thank you
- - - Updated - - -
unfortunately not too many salvage or wrecks in south Florida. I will keep looking on the forums and craigslist for parts and...
I am up for the challenge as long as I had good pictures of the inside of the rear panel, Maybe from this site someone had pictures with a quarter cut off.
I have a customer that would like to turn his post road runner into a hard top model. Has anyone done this before? What are the pitfalls if someone has done this. I am sure someone has used moldings etc for sale if I looked hard enough for the conversion.
Opinions? besides the numbers not...
Nothing I know of repop is in burnt orange. You will have to paint what you have to restore the color and paint the new pieces from Black to BO. Tony's Parts have some new interior plastics. Legendary will have the soft vinyl. Good luck, I am in the same position as my interior is BO.
Hacmjim, With the car off, make sure the trans is in neutral by checking the drive shaft. Align the shifter with a pin through the mechanism to keep them straight for neutral. Set your rod lengths to align the levers on the trans. Your wheels will spin in gear with the clutch in. The weight...
I will check if it on backwards. It is apart now and was hard to get a clear pic with all the things in the way. The mating surfaces of the Z bar and rod will not allow a clip. The rod was not in the center of the hole. a little off to the side not rubbing.
- - - Updated - - -
Fork Rod was...
Help!! In my shop, I have a buds 69 Road Runner that I am cleaning up some problems from some " ADVERTISED MOPAR RESTORATION EXPERT". I am currently working on some oil leaks and steering box replacement when I noticed that the clutch rod that goes from the pedal to the Z bar (can't think of...
COOOOOL, I had not seen Homers HS ride before!! Too bad they did not get the wing correct on the deck lid. I wonder when they first aired the episode with the car.