Search results for query: *

Grundy had no problems insuring my car with a roll bar

If this is fox out of Elpaso tx, Run! Bought one off ebay three years ago, sent my core, still waiting. thanks to paypal I got my money back but not my core.

Yes you can, I don't have the roll pin, I can sell you that one. $10 shipped

Should look like this. Same from 67-78. Roll pin goes in the two holes.

Mines an Abody but LL1 with clear over it. Made it a little darker.

Should be a welt on the front of the boot that slides into the channel.

Late 70 early 80s Ford trucks have a canister that is a dead rinner for the air grabber canister. Same mount and hose location.

AX 15 will not take the power of a V8, more of a 4cyl and V6 trans. I would look for a NV3500 from a V8 Dakota. I have found them in V6 sports also. 2000 and newer.

Here's mine on a Roadrunner.

I pulled mine from a 88 Olds Cutlas cierra. Tha car uses a serp. belt, so I used a pully from another car with a V belt. I pulled everything I could from the Cutlas, it had several fusible links and a power junction. As for mountin I used the small block upper mount and a big block lower. I used...

Heater core is replaced with the unit from classic. When I put mine in I had already replaced the radiator with a larger one. I bought a cheap vacume pump from Horible freight, and charged mine my self for about $80.

By passed the amp gauge, now running a volt gauge. Pulled the cruise from a 70 Dodge Monaco many years ago. Fit perfect.

I would start by making sure you have some good grounds. I would the go to the turn signal switch. Does the right side work ok?

I put the Classic air in my 68 Barracuda convert. If you can work a drill and some wrenches you can put it in, in a day. Mine works great, you need to pull a good vacume before you charge it back up. As you can see I also used a late model GM 120 amp alternator.

Dry. just rub it down good and blow the dust off.

4 ott steel wool, best window and chrome cleaner around. Thats all we used in our body shop. I still use it, makes the glass sparkle.

Just the HEMI cars.

That is the correct grill for a max wedge car. Car looks good.

Noy easy being green!:rolling: couldn't aford the hard top on mine.

Made a nest out of the dryer sheets I used. Snap traps with peanut butter, and glue traps around the car. Might try the pepermint oil.