• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. K

    Need pics of brake lines from Master Cylinder to Distribution block

    http://www.forbbodiesonly.com/moparforum/threads/proportioning-valve-brake-line-question.93037/
  2. K

    Lowered B Body Info & Pics

    Wow. What size turbo is that. That's a huge garage!
  3. K

    Lowered B Body Info & Pics

    Just in the finishing touches. Here is a better shot of my ride. It's low... Back rubs when I'm backing off a curb on an angle. But, I won't be driving on many curbs.
  4. K

    First Gen Viper Calipers on Mustang II spindles w/ 15" wheels

    Pretty sure there is no kit for them. Check over at protouringmopar
  5. K

    Bolt holding pushrod to brake pedal

    Its a special shoulder bolt. 9/16 is roughly the size of the shoulder. Just went through this a while ago myself. http://www.brewersperformance.com/proddetail.asp?prod=BPR-BOLT
  6. K

    Proportioning Valve with stock distribution block

    That's exactly the block I have. 2 lines to the front (left-right) and one to the back. I am thinking that the block is like a tee fitting for the front (fluid entering the top and bullheads the fluid to the left/right) and the bottom rear is like a coupler (in/out). This being said with the...
  7. K

    Proportioning Valve with stock distribution block

    So I plumbed in my proportioning valve. I have the front half of my mc going into the top of my distribution block. The rear of the mc is plumbed into the proportioning valve then into the bottom front half of the distribution block and exiting out the bottom rear of the block.
  8. K

    Proportioning Valve with stock distribution block

    Yes, I have the wilwood 260-8556P master cylinder. to keep the lines neat and tidy, I wanted to keep the lines going to the distribution block. I am running 4 wheel disc now. I am looking for confirmation that the distribution block is okay to run with the proportioning valve inline to the...
  9. K

    Proportioning Valve with stock distribution block

    Thx Miller, It is a 4 wheel drum distribution block. So, I figured the pressure would be equal for all 4 corners. That being said, there really was no point with a single or dual reservoir mc? I should be able to just put the prop valve to the main line that runs to the rear. Oh well, worst...
  10. K

    Proportioning Valve with stock distribution block

    Hey guys, Looking for some guidance here. I am sure I read someone somewhere ran the factory distribution block with a proportioning valve inline to the rear. Is this correct? The factory lines have the rear of the mc plumbed to the front, and the front of the mc plumbed to the back. My...
  11. K

    Where do I find longer wheel studs

    ARP Fasteners will have what you need.
  12. K

    Distribution block and proportioning valve leaking

    Hey AMX, Any more pics of your wildwood install?
  13. K

    Wilwood brakes

    13" should look great with 18" Here is mine with 19" wheels 13" brake up front and 20" wheels with 12.19 in rear for an idea.
  14. K

    RMS Alterkation front suspension

    Yup, there is going to be the hard core old school is best group and the improve on the old group. No right or wrong. I personally would go with the upgrade. I am sure driving will be a lot... Um different is the safe word. I have one myself, but, the car is not on the road yet. I could not...
  15. K

    XV Racing vs US tool frame connecters

    I believe Jim meant now owned by? xvengineering.com What do you think of the bolt in kit uscartool makes? Pricey, but, bolt in. I am thinking of this direction.
  16. K

    Alterkation / Street Lynx

    4 tabs onto the rear end and the upper bar onto the rear of the car. Across where the bump stops are located. Not a big deal if you are comfortable with that. Oh, if you are running Dana 60 there is a bit of work to get the pipes to exit out the back...
  17. K

    Alterkation / Street Lynx

    I couldn't be happier with mine. Install for the alterkation was a straight forward and fit was spot on. Get the power rack with the kit. Comes with hoses to fit up the the ps pump. Rear is a bit more work though. You will need someone with some welding skills.
  18. K

    Lowered B Body Info & Pics

    Yup. Agree. Keep with 4.5" bs upfront and 5.5 for the rear. I wish I kept to the 4.5 for my fronts.
  19. K

    Lowered B Body Info & Pics

    I just looked over my invoice. Originally I thought I had requested 4.5 front and 5.5 rear. Looks like I ordered 5.5" backspace on all 4... Hmm. I don't remember doing this now or why... Haha.
  20. K

    Lowered B Body Info & Pics

    Thanks. The color is viper GTS blue, can't remember the year. All I would suggest in regards to the rim size is wider than 8" up front. I wish I did 9". 245 tire is to narrow IMO.
Back
Top