• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. oldbee

    Linkage

    Throttle cable kinked/old and fraying inside? Check everything over, shouldn't be overly stiff.
  2. oldbee

    Linkage

    Lube all pivot points. Too stiff a throttle return spring?
  3. oldbee

    New here with a 66

    Welcome aboard from Ohio.
  4. oldbee

    Timing is everything

    Could’ve pulled up just a wee bit, lol. Hell when ya get old!
  5. oldbee

    Heater blower ground

    LOL, can’t better Wayne’s description.
  6. oldbee

    Good Evening and Happy New Year to all

    Don’t trust anyone that chimes in from ‘Joisy’. Just kidding. “Gtxman” or others may chime in soon.
  7. oldbee

    Restoring Divider between interior and trunk

    Piano hinge has me stumped...
  8. oldbee

    The new guy, and some questions

    Welcome from Ohio, have fun.
  9. oldbee

    Undercoating under fenders

    You want me to remember back to '68 before there were small cameras,lol? I'll try, fairly solid where you could see around the tires,slightly hit or miss around fender roll edges. Splash shields kinda the same. You have to visualize a worker kinda thinking " cover what I can see easily with no...
  10. oldbee

    Difficulty getting out of reverse

    Or ur clutch not releasing all the way? Just another crazy idea from what you describe.
  11. oldbee

    Difficulty getting out of reverse

    I haven't touched a 4-spd trans or shifter in probably 3 decades,, but you could have wear in shifter,trans(needle bearings,shift forks, side cover plate) or shifter arm bushings or a combination of all the above that could cause problem. Just throwing out possibilities.
  12. oldbee

    Difficulty getting out of reverse

    Try adjusting first like WileE says; you could have trans internal problem also. Think the "alignment" bar he talks about was about 1/4"dia and shaped like an Allen wrench.
  13. oldbee

    66 charger w/ 440 starting issues

    Like KK said, also good grounds everywhere & what size are the batt.cables?( in trunk, I'd go with 2ga as a minimum)
  14. oldbee

    six pack?

    +1 on the posts but I was just thinking of a 'new guy' . Having to start from scratch he could almost buy 2 intakes&carbs for less money.
  15. oldbee

    six pack?

    Alex unless you want to spend $$$$& headaches go for a 4-bbl.
  16. oldbee

    Do I have a choke?

    Alex that eBay probably won't work, I'm thinking your choke should be sitting down in the well in intake manifold. Also length of rod won't match up w/o a lot of bending.
  17. oldbee

    Do I have a choke?

    No problem, the AVS has a spring-loaded "choke plate" over the secondary barrels. I like them better because a little bit easier to tune for secondary tip in.
  18. oldbee

    Do I have a choke?

    Alex u do know u have an AFB right?I think AVS linkage is a little different .
  19. oldbee

    Do I have a choke?

    Missing?! My youngest loses some of my stuff all the time(he's 43!). Anyone's guess why the choke rod is gone.
  20. oldbee

    Speedo gone mad!

    They don't need much but I'd lube up a new one also.
Back
Top