• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. pedal2themetal

    I got better mileage

    HI YY1: I just filled up and looked and yeah its the R+M/2 rating But our E10% High test is 91 oct. and the Non-eth is 86 oct. only one grade of that fuel. good luck take care tim
  2. pedal2themetal

    I got better mileage

    HI, Your signature says with up grades?? What kind of up grades? did you change, distributor or timing set and if so to what? good luck take care be safe tim
  3. pedal2themetal

    I got better mileage

    HI Cranky, Just throwing it out there but the stock timing setting on the tag under the hood for my 75 is (0*). take care be safe tim
  4. pedal2themetal

    I got better mileage

    HI Dog, Yeah, I thought about that as I posted it.. Tho I didn't use the " sign .. I was thinking they would know that (in) was intake and (ex) was exhaust for lift of the cam.. I'll be more careful in my postings Thanks Take care be safe tim
  5. pedal2themetal

    I got better mileage

    Hi, not running 0* timing running .. running about 12* .. 0* timing set good luck take care be safe tim
  6. pedal2themetal

    I got better mileage

    Hi, just thought I'd throw it out there.. I switched from supreme Ethanol fuel with 90 something octane to Ethanol Free regular with like 86 octane and gained almost 2 miles per gallon and the car runs much better.. Car is a 1975 Fury, 318 , 0* timing set, with 450 Quick Flow carb, cam is 440...
  7. pedal2themetal

    power valve or bowl gaskets?

    HI, I just went out and looked at what he put on.. and there like a black hard plastic? I ran the motor and watched it for a little bit and could not see any fuel leaking out anywhere?? look down the ventures and watch around the bowls and accelerator pump. Something I thought was weird was that...
  8. pedal2themetal

    power valve or bowl gaskets?

    Hi would washer like these work with the rubber bonded to them or would fuel eat the rubber...
  9. pedal2themetal

    power valve or bowl gaskets?

    HI All, I have a holly 450 QF sitting overnight both the bowls well empty, I can see a little puddle/stain on the intake. Carb is like 3 months after a rebuild from a Carburetor Shop. I have tried snugging up the bolts and its still draining? Do you think its the gaskets or the power valve and...
  10. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI, Can't seam to find a booster for it.. : ( .. it was running like crap this morning .. Unplugged the booster and it runs so much better no missing at all.. Now just need to reset timing and mixture screw's .. I"m going to run it in manuel mode and wait till I find one. thanks again take...
  11. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI, If the needle and seat were leaking the fuel level would be high as it wouldn't stop the fuel flow. I think I've found the culprit. Brake booster ... DanielSlocum Metioned it earlery about him having a bad grommet causing him fits too. in post #7 this time when it started messing up I was...
  12. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI, yes I have a 1" adapter square bore carb to spread bore intake.. can't go any taller or my filter nut is into the hood. its already into the insulation material. Whats a good idle timing setting.. the hood card says TDC at 750. but I do have upped the cam (See above for spec.). I did just...
  13. pedal2themetal

    Problem with Quick Flow 450 flooding

    hi, yeah, No fuel running out of the carb, just smells very rich when its not running right.. I wiggled all the vacuum lines with no change even the booster line and PCV line. Since the plugs are all white .. I'm thinking its not flooding but maybe not firing on all 8 sometimes. The problem...
  14. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI, Now that may be a possibility ... I have noticed a weird noise once in a while when applying the brakes??? and once my pedal was VERY hard.. I'll check that out Thanks,, take care be safe tim
  15. pedal2themetal

    Problem with Quick Flow 450 flooding

    Hi, Picture of what? take care be safe tim
  16. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI, Thanks for the reply.. Sorry its a 318. I'm not totally sure its timing. I'll check thru it tomorrow. its been running fine with no problems for a few years (daily driver) .. Could be distributor related since the plugs are white even tho it runs and smells pig rich sometimes .. its very...
  17. pedal2themetal

    Problem with Quick Flow 450 flooding

    HI All. HI, OK.. first question.. if I only have 12ins of vacuum would a 6.5 Power valve cause flooding at idle?? Second, I've had it rebuilt by a carburetor shop. having a problem with it flooding occasionally and doesn't seam to clear out once flooded and runs pig rich.. Floats are set to...
  18. pedal2themetal

    Accelerator pump leak down

    FORUM MASTER PLEASE REMOVE ME FROM YOUR MEMBER LIST.............
  19. pedal2themetal

    Accelerator pump leak down

    I'M A 70 YEAR OLD MAN AND I DON'T LIE NEVER HAVE NEVER WELL SO PISS ON YOU.. YOUR A REAL POS.. IN FACT I'M DONE WITH THIS FING FORUM
  20. pedal2themetal

    Accelerator pump leak down

    HHHMMM I did tell him it starts FINE cold with one pump.. the problem is getting it moving (I did say no fuel shot is how it acts) but that was after its running I get the problem stalling out to move the car (I did say rap but actually I just have to wiggle (play with it) the throttle a couple...
Back
Top