• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. ply64post

    1966 Bumper jack

    66-67 Bumper jack Ron Here are a few pictures of a jack that I have. Here is a reliable source for information for air cleaners,jacks,and other good info. Jeff http://www.nicksgarage.com/jacks.htm#bbody
  2. ply64post

    Wheel opening lip mouldings..

    W/lips I am very sorry for the confusion,the numbers I listed are the right part numbers for the Coronet R/T. 67 Coronet R/T Front part # 2806-302 R and 2806-303 L Rear part # 2586-078 R and 2586-079 L 66 Coronet 500 4 dr,2 dr ht and conv all Front part # 2806-302 R and 2806-303 L Rear...
  3. ply64post

    Wheel opening lip mouldings..

    Wheel lips Ghostrider Here are the part numbers for 67 and 66 and there applications. Part numbers are the same for 66 and 67 for the applications I gave you. The 440 trim and the 500 is different except the rear w/ lip on the 67 500 4-dr. It is kind of strange on how they used front on the...
  4. ply64post

    1967 deluxe trim clips?

    Fasteners and clips Have you checked with these people?? They have a great selection all kinds of clips and fasteners. Do you have any pictures of any surviving clips and dimensions? pages 131-160 trim fasteners pages 161-167 nylon trim fasteners Jeff...
  5. ply64post

    Mid Sixties 8 3/4 Help Me Sort Out What I'm Doing Here

    Guide to the Chrysler 8-3/4" Part I of this guide was authored by Gary Lewallen (aka. Vaanth) for the MML and Internet community. It was originally published in January 1998. Part II was authored by Doug Ahern as a supplement to Part I. A Chrysler 8-3/4" Rear Axle Guide Part I...
  6. ply64post

    Leaking 727 Auto advice

    trans leak Doug Some more info and pics. In the pic with the red circle under the E clip and washer is the throttle shaft seal. Jeff:sFl_america2:
  7. ply64post

    Leaking 727 Auto advice

    Valvebody Seals Doug There are 2 seals 1 for the selector shaft and 1 for the throttle pressure shaft.They can be installed without removing the pan,it will take some time but can be done.The tool above [in picture]to remove the selector seal and there is a tool to install the selector...
  8. ply64post

    need some info on parts for my coronet!

    electric regulators YY1 On your question about 66-67 charger electric regulator interchange. part numbers electic rear regulators 66-67 b body 2-dr ht 2583-764 Rt and 2583-765 Lt 68-70 b body 2-dr ht 2583-764 Rt and 2583-765 Lt 68-70 charger 2583-764 Rt and 2583-765 Lt 66-67...
  9. ply64post

    need some info on parts for my coronet!

    quarter regulators To all These numbers are from my parts books 1966-1970 [manual regulators]. Part numbers- Rear 2-dr regulators Models that are the same. 66-67 charger 2583-034 Rt and 035 Lt 66-67 b body convertible 2583-032 Rt and 2583-033 Lt 66-67 b body 2-dr ht 2583-030 Rt...
  10. ply64post

    Fuel gauge problem

    voltage limiter Ragman This info could help and you can update yourself. Jeff http://www.allpar.com/history/mopar/electrical2.html http://1962to1965mopar.ornocar.org/ml-instrument-voltage-regulator64.html
  11. ply64post

    67 Coronet turn signal switch

    switch MightyMopar The plate goes on top and compare the plate to your old switch.
Back
Top