Search results for query: *

It will not be uncommon to see some oil residue at the radiator cap opening. After it runs and sits the oil will rise to the top. Just take a suction gun and suck it out. Just the nature of what happens when oil gets in the cooling system. Very common with diesels with injector cup failures and...

I was thinking the same. Figured the only reason he asked was because he had seen coolant in the transmission.

Engine can be flushed with Cascade dish washer soap. Works real well and is commonly used with diesels. As far as transmission goes drain the converter and pull the pan along with blowing out the cooling lines. Let it drain well for a day or two. Refill and run. You may want to do it a second...

Who knows what caused it. Clean it out, vee the crack, weld it all up and box it in.

He has mag wheels not hub caps. Read his post and look at his car.

Take one rear wheel off and look at the end of the axle. If there is a big nut it is the taper style.

2,000 miles away, Plane tickets,Hauling, etc. That 5k car now became a 7.5k car.

There are lots of buyers that also not so lucid and suffer later from buyers remorse. You have offered very little picture wise for anyone to make a accurate evaluation. Also by your descriptions you have not been in the trunk or crawled underneath it. Again you asked for opinions so no sense...

You asked for opinions. Thinking that car just needs floor pans is a dream.

The way it sits it looks more like a parts car. Has not run in 25 plus years is an understatement. The way it sits 1,500.00

4 - Speed - Shifter - Floor Pan Tunnel Hump - Original - B - Body - 1963-65 - USED - Blue Star Performance

What car?

Were all max wedge intakes two 4 barrel? I thought the max wedge heads in some applications had a single 4 barrel?

Far as I know its exactly the same as all B/RB with the exception of the port size.

Did you test for power at the fuse? Thats what you need to verify.

It takes a couple seconds to test the fuses.

Sounds like a park plate issue.

Mancini Racing Steel Radiator Fan Shroud

How do speedometers work?

You can use an b/rb pump and brackets on the Hemi. Get a gear box and what ever hoses you will need depending on pump and gearbox fittings..