Search results for query: *

I was hoping that would be the case thank you for your input

Was wondering if anybody has a B body specifically 69 road runner with trick flow 240 heads and factory power brakes ? As I understand I need to run a taller valve cover and was wondering what the clearance would be on a 440 RB to the power break booster?

http://www.evanswiring.com/ You might check with Evans I have purchased wiring harness from them before very nice product they may have what you’re looking for

M&H http://www.wiringharness.com/ They do not sell direct to the public. They do however provide great technical support

Thanks for the input.

That makes sense. Thanks

I am restoring a 1969 Plymouth Rd., Runner and I have a 1968 new wiring harness manufactured by M and H is there something different between 1969 in 1968 Dash harness and headlight harness.

No sir. Both are original. I have a pair of each. Kind of odd to me.

Can somebody explain to me why the difference in height? These are supposedly 1969 road runner satellite GTX Noticed they have the female pigtail however the housing is ever so slightly taller on one versus the other the number is the same on the stainless trim 2853436

Does anyone know what type of construction the heater valve is? This has the 2 heater cores with the valve that closes off the heater core to 30% when you turn on the A/C. The A/C door does open and close this valve from my view externally. Could it be the lever moves externally but the valve...

Thanks for the confirmation.

is it possible even though it has been just charged it is not fully charged enough to offset the 30% for the the reheat cycle? Water valve functions on fire wall. Still cold on the left and warm on the right

I will check the water valve as suggested. That could be not opening/closing as it should. Do you know what the method is to test or check it by chance?

I agree with the actuator as suspect

Thanks I will take that advice

There are 3 vacuum operators. 2 of them are operating near as I can tell correctly. The 3rd when I change the controls does nothing. It is connected to the door that is directed to the foot area. Would that create a heat on one side and cool on the other? I would think when the A/C is...

I have cold air one the drivers side and hot on the passenger side. Could my control switch be bad and not overiding the A/C switch when it is slid it should turns off heat?

I did a door open close check. It looks like the heater doors are not functioning correctly. The A/C and heater doors are both open at the same time. It looks like the vacuum canister that closes the heater doors may not be functioning. I will check and confirm that next. This could be why I...

Additional information. I had a factory original water valve rebuilt and it has the copper line that inserts in the air stream. Not sure if it is functioning correctly.

I need help with a factory not aftermarket restored A/C system. 1969 Road Runner everything has been rebuikt. It blows cold on the left side vent Defrost and warm our the right side. All doors and vacuum actuation appear to function correctly. Any help on this would be great