Search results for query: *

It is a 4L60E PT

Here is my 4L60E being mocked up for motor and transmission mounts. It was built by Phoenix Transmission in Texas. It uses a Quicktime Adapter Bell Housing, so it is a 93 up General Motors transmission. Mine is built for about 550 horsepower. I asked Greg at Phoenix what we would do if it didn't...

I had the same issue with my TTI headers touching the pan on my 4L60E. I did the same a 493 Mike suggested. I called TTI and actually talked to the owner. He told me to get a 2" pipe and stick it in the collector and bend the crap out of them. I asked him what would happen if I broke some weld...

I would look for pieces of metal in the spider gears and the axle gears. this would lock the two axles together. sure grips have plates and springs, similar to the GM. just my thinking PT in Tennessee

just need to talk about old times with T10 its a T10, but the flange bolt pattern looks screwy for a GM. i think i have rebuilt 40-50 of these in the 70's. we tore them up on almost a weekly basis due to hot-rod shifting. clean inside means nothing if the brass blocking ring teeth and the...

my opinion the balancer it to important to start guessing about how to repair it. if it comes apart while the engine is running all heck will break loose. trash it and start again. just my 2 cents. pt in tennessee

question I don't think bolts are 1/4 inch. I believe 5/16. after taping just let us know. thanks pt in tennessee

more info need a 1/4" torque wrench for band adjustment. be carefull and slow as you teardown. as 747 said a good feeler gauge set is necessary. a place to lay every part is good. nothing in bucket or box. every part has a place. there is a lot more to a total rebuild than just changing parts...

I always go in any shop I am thinking to use and look for oil dry. if I see any I just make some excuse and go somewhere else. clean shop=clean transmission or engine. most oil dry is porous to make it absorbent, and this is just like abrasive. would you want your transmission rebuilt with a...

Rich, when will this 2.0 system be available? thans pt in tennessee

The front pump turns by the torque converter body turning, so you were possibly turning the front pump dry, not good at all, hope you didnt ruin it. sorry for the not-so-good news. pt in tennessee

727 info you talk about the clutch packs, but how about the front pump? you have to take it out to get to the clutch packs. that is what the torque converter hooks to, sound like front bushing. how does the slot in the torque converter look like? that is what goes into the pump. it is not so...