Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Put those poly boots in a bowl of water and microwave for a couple of minutes, or until the water is good and hot. Make sure the bars are lubed well before hand, I just used bearing grease. While they are still hot, slide them down the bar. This really makes the installation quite easy.
I would give it a shot; it looks repairable to me. Of course you will need a soldering iron and resin core solder which is probably what was used to connect the broken pin at the factory. The worst that could happen is getting a new board.
I overhauled my front end completely a few months ago. I got a cheap compressor from harbor freight and worked off jack stands. You can get the specialty tools you need on the loaner deal at Auto Zone. Used the prothane bushings on the lower control arms, put anti-seize on them in addition to...