Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here's one I painted after smoothing out by sanding. Has a gloss finish but I could scuff it up to make it look more original. Did the entire set to match.
Terry W.
I had a couple of old ones that were not broken or cracked but were discolored. I have a new center filler piece and took it down to the paint shop and got them to mix up some flex paint to paint my old ones with. I sanded the old ones and painted them. They turned out really nice so I did all...
Did you go with their A, B,E body bench seat conversion set where the shoulder belt attaches to a stud on seat belt buckle? Similar setup to the Ebody 71 hardtop setup.
Terry W.
Here you can see the long blue adapter I had to make to extend mid-point from roof rail bolt hole. You can see the gray retractor adapter I made to recess it further back into rear quarter to allow install of rear interior side panel. I also had to remove the hard plastic sleeve from the female...
So, I went with aftermarket 3 point belts as seen in the photo below. They are nice. I had to make adapters using flat bar to hang the mid-point lower (at top of photo) to match the length of the original mid-points (top and bottom of attached photo of originals) to keep from having the belt...
I have photos of the seat belts for a 74 Charger bench seat for reference. My seat belt interlock switch is hooked up, so that's why there's wires on belts. First phot shows a set installed in my car. The second photo shows the center belt if used. If you decide not to install the center belt in...
@DrewTX . Have you had any luck yet finding the bench seat? I have one in my 74 Charger in black but it's missing hard plastic back on drivers seat back and hinge covers.
Terry W.
The covers in my 74 Chargers are different and use the clip in kind shown on left in my photos. The screw in ones may be different lengths as shown also. The one you have in your photo is probably as good as any used ones you find. I don't know of a source for a new cover.
Terry W.
My 74 Rallye 360 auto still in the process of assembly after painting it last September. The one in last photo is my $900 74 Charger in Aztec Gold that I drove home and parked awaiting it's turn in my shop.
Terry
I need the shield that protects the rubber fuel line from the fuel tank sending unit. It attaches to the underside of the trunk using a bracket in the trunk floor. See photo. Please let me know if you have one in good shape and your asking price. It will ship to Washington state 99336. Thanks...
I'm looking for the woodgrain non- a/c dash bezel for a 1971-74 B-body I have a louvered vent bezel to trade or will buy yours. I want a blank one without the vents. I'll post a picture of the piece I'm talking about showing the vented ones I have. Thanks.
Terry