• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. toolmanmike

    Intake manifold height

    Another vote for CH4B. A friend built a mild 440 with one and got just a tick short of 500 horse and as much torque. They work quite well.
  2. toolmanmike

    69 383 hp

    Agreed.THe DP4B is a good one.
  3. toolmanmike

    Engine stalls when shifted into gear

    Troubleshoot and diagnose. Something that isn't done with folks that don't know.
  4. toolmanmike

    Engine stalls when shifted into gear

    Has it backfired lately? Holley's will blow power valves out if they backfire. THey will run like crap. If you don't know a lot about cars find a friend that does. May be you could exchange carbs with a known good one. Revving it to 3ooo and dumping it in gear is not advised.
  5. toolmanmike

    la 318 question

    Go with the 4 barrel. 500 2 barrels aren't a bad carb but they aren't the best for mileage.
  6. toolmanmike

    la 318 question

    :rofl: :rofl: :BangHead: Not this again
  7. toolmanmike

    During deceleration, fuel dumping out of the tanks vent line. What gives?

    Fuel pressure, regulator, and carb you ate running?
  8. toolmanmike

    318 carb to replace or upgrade

    I like the electric choke myself. One wire hook up to a switched power source.manual choke you will have to operate from the driver's seat via a cable.
  9. toolmanmike

    318 carb to replace or upgrade

    If you buy it, keep your fingers crossed. With a upgraded cam and compression I would go 4 barrel intake and carb.
  10. toolmanmike

    2X4bbl

    :lol::lol:
  11. toolmanmike

    Blocking heat riser and effect on choke operation?

    Possibly. Most aluminum intake installs include a newer carb with electric choke.
  12. toolmanmike

    Fuel leak from cap

    Leaking out while you drive or splashing back when you fill?
  13. toolmanmike

    Custom Air Cleaner Decal

    Nice! I like it.
  14. toolmanmike

    Stripped afb choke housing screw

    Too small of a screw. Those are self tapping machine screw thread. Probably a #6 or #8.
  15. toolmanmike

    Cracked fuel pump

    Cracked. No, busted in two.
  16. toolmanmike

    Cracked fuel pump

    :BangHead: :BangHead:Never seen that happen before.
  17. toolmanmike

    1972 440-4 Difficult start after not being driven for several weeks

    It is momentary used only to prime the system. And yes, there are rollover switches you can install.
  18. toolmanmike

    1972 440-4 Difficult start after not being driven for several weeks

    Here's a couple of electric primer pumps. Wire it up with a momentary toggle or push button and away you go. Electric primer pump for fuel
Back
Top