• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. turbine68rt

    Need a couple of engine compartment shots 440 six pack

    This is a '70 but may be useful info. https://www.motortrend.com/how-to/mopar-engine-detailing-2/
  3. turbine68rt

    Fuel Pump for '73 440 with 3/8 line from the tank

    Carter Muscle Car Mechanical Fuel Pump Fits Chrysler BB 440 33 GPH 6 to 8 PSI 724956015931 | eBay this has the 3/8 inlet, but depending on what carb you're running the 8psi may be a bit much for a typical Edelbrock.
  4. turbine68rt

    Here is a case where he should have stopped at the front end...

  5. turbine68rt

    Here is a case where he should have stopped at the front end...

    Ironically enough whether it's at a local show or Carlisle, one of the top comments I get is "I like the round taillights". I like all 3 years, I just had a thing for the 68's since I could ride a bike and saw them on the streets in the 70's.
  6. turbine68rt

    Fuel Filter Location on '73 Charger w/440

    fits 67 68 69 70 71 72 Fuel Pump to Carb Line 440 / 440 With Thermoquad NEW | eBay between two hard lines on the outlet side
  8. turbine68rt

    Build Date of my 73 Roadrunner

    I've seen a 68 Fury in a junkyard with approximately the same build date. Early Aug '67. Do you have a very low vin sequence number?
  9. turbine68rt

    Vacuum Advance Distributor for '73 Charger 318

    Any kind of label, part number, or brand markings on the housing?
  10. turbine68rt

    Vacuum Advance Distributor for '73 Charger 318

    Is there an open window in the housing where the vac advance would be mounted? Maybe a PO didn't reinstall it.
  11. turbine68rt

    1971 Plymouth GTX, 440 engine 727 kickdown adjustment

  12. turbine68rt

    New carpet and trouble mounting seats.

    I used to use a plug in soldering iron to make the holes from underneath. Worked pretty good.
Back
Top