Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If it was me swap the gear set. Aslong as the SG carrier is for the lower gear ratio like 321s in the Duster you should be good. Lots of info on this @ FABO.
I do one of our local shows that had about 600 cars this year, think I counted a dozen Mopars and 2 AMC. Two of the cars were mine. The one big show I go to is HAN in Reno, Cant go this year but all my buddies are leaving this Monday. Every kind of car you can imagine with lots of Mopars. A...
IIRC the 375/396 had a solid cam and the big square port heads. Rated at 375 in a Chevelle and 425 in the Vette. We are building a 68 Chevelle 396 Hedders all the usual HP goodies, will see how it stacks up against my 68 440 R/R.
Last summer when building a Gasser the drag link from Speedway was a bit to long. Had to shorten it and it left to few threads for the tie rod end. Try finding a 5/8 left hand fine thread tap. Well low and behold the local machine supply had one in stock. $30 made in China and will probably be...
Stay busy, Idle hands are the Devils playground and Lord knows you are in the thick of it. My brother is sending Boudin from Best Stop in Scott . The stuff in N.O. was Blah like you said. Merry Christmas.
I am guessing it is for a 68? IIRC there is a small set screw in there. Use lots of WD-40 or any lube. There is a guy that sells the lens,socket,bulb and harness for these special little buggers. Let me see if I can dig up his info.
Taken apart Yes. Got the car as a roller so everything was apart. I put the 3 speakers in from a vendor on this site, only using the 2 outer with some 6x9s and a sub in the trunk. Sounds pretty good.