• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by relevance
  1. T

    Pre-Oil or Not to Pre-Oil

    Just went through this a few hrs ago on my 499. All this dizzy work for pri oiling is the reason I put a pri-oiler on my 557,...just flip a switch or push a button.
  2. Chargerjase

    Installing Classic Auto Air in a '70 Charger

    Lol, that's exactly right. Sometimes it would be nice to have contacts at NASA, but for now a standard vacuum pump will do. :lol:
  3. F

    Running tapered bearings with rear disc brakes

    I agree with the fact that calipers should float and that setting the end play towards the lower tolerance would probably work just fine. I already have some Wilwood rear brakes and of course they recommend Green Bearings which I have heard do not have the reliability factor of tapered bearings...
  4. Kern Dog

    Surprising Signs of Dementia

    Feel free to call me out if/when I do it. It is not intentional. I do strive for what I think is original, funny and informative. I don't post it if I don't personally like it.
  5. Nacho-RT74

    Rev-N-Nator Not Available?

    I’d like to get an extra unit
  6. Nacho-RT74

    '73 Rallye Instrument Panel Bezel Removal

    I’m not clear on what are you doing. The bezel will come out with the cluster. Once on bench you can remove the bezel. Can’t remove just the bezel with cluster still on car. Meaning with this, once you removed Radio and unplugged everything, drop the column, remove screws (there are two hidded...
  7. 1 Wild R/T

    Installing Classic Auto Air in a '70 Charger

    The air/freon is pumped out of of the system, the pump vents to the atmosphere... The oil remains in the system, if you were able to pull 30 in/hg water would boil at 90 degrees below zero... But since NASA didn't loan you their vacuum chamber you can't.. Hopefully you can get somewhere around...
  8. Kern Dog

    The Meme not a Meme Thread Part DEUX

    You're on your way to becoming American.
  9. M

    Transgo TF2 in A904

    Thank you for demonstrating. That's what I thought to do. I'll give it a try. Thank you for your time. Gretings from Germany Mario
  10. Kern Dog

    Installing Classic Auto Air in a '70 Charger

    I just finished the installation of a Vintage Air system in a 68 Plymouth. Vintage Air installation in a 1968 Satellite Wednesday I am bringing the car to a local shop to do the evacuate and fill. I may have them do the service on this car too but I want to find any leaks I might have before I...
  11. Kern Dog

    Installing Classic Auto Air in a '70 Charger

    I've seen a few videos that also state to leave the red line and knob alone. I planned to put the vacuum pump on and see if it holds the recommended 30 in/hg or whatever the spec is. Thanks, I've heard that too. I am curious though....if the vacuum pump is pulling, where does the air inside...
  12. B

    Holley Carb 2300 2BBL Fuel Bowl slowly draining internally!?

    Did you have a backfire? Possibly blowing the power valve? Doesn't take much.
  13. RemCharger

    Dana 60 Outer Bearing Races "Cracked"

    Define operating loads.
  14. Chargerjase

    Installing Classic Auto Air in a '70 Charger

    FYI, the reason you put the system in a vacuum is to remove moisture. The vacuum lowers the boiling point of water and the water actually boils off when doing this process.
  15. 1 Wild R/T

    Installing Classic Auto Air in a '70 Charger

    If you open the handle on the right (the red handle) you allow flow from the high pressure side to enter the tank... Generally the tank is big enough to absorb that but it still shouldn't be done... If you were to do that with one of the small 12oz cans it could explode... The only reason to...
  16. kiwigtx

    The Meme not a Meme Thread Part DEUX

    Turkey slices, bacon, Swiss cheese and a small amount of tomato. I asked for white bread toasted.....I hate that bird seed bread. Fries were good and the Heinz 57 was great to go with it.
  17. G

    Pinging 505 help

    The heat range of the plug is controlled at the design stage. A projected nose tip plug will have the insulator size adjusted to maintain the nominated heat range. Projected nose tip plugs are better at self cleaning & preventing misfires. You would only switch to a non-projected tip plug if you...
  18. threewood

    Where can you order custom hood scoop script? 340 scoops

    Blue Bee Printing. I had custom 440 4 BBL hood stickers printed by them and they do excellent work. You need to provide a picture and size of the stickers and they can replicate the script for the new engine size.
  19. RemCharger

    The Meme not a Meme Thread Part DEUX

    Was it good? What's in it
  20. kiwigtx

    The Meme not a Meme Thread Part DEUX

    Close.... a Superbird sandwich at the local Dennys. With a coke, no ice. :lol:
Back
Top