Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My 24 x 24 is well insulated and heated with a 220v electric with fan. One 9x7 door and a walk in door, 110 window ac for summer.
I would guess aprox $40.00 per month year round. That garage panel is fed 100 amps from the house 200 service.
My 30 x 50 Morton is not heated and just for...
I am pretty sure that is from Joe Chrisman whose company was TranZact of indy. He has been out of business for a while. He was difficult to get on the phone and both times I bought from him I put a check in the mail and prayed a part would show up (they did) but I never heard whether the last...
I will look into Carter BBD and Rock Auto.
I was wondering if I needed to change out the master cylinder to a dual.
The gas is very old. It's been sitting for a long time. I will need the tank to be dropped and cleaned.
Call fine lines or right stuff
Any of the brake line manufacturers can set you up with most of needed parts.
Get a new master on ebay for the 67 and up.
Pirate jack is another source for the master cyl
It's an easy upgrade
Thanks doug.. didn't think it did that much, now i know :)
Place hasn't responded back bout the wrong part shipped.. probably gonna put it back together with what i have, should end up around .065 endplay which is in spec but not great, no biggy.
The rear pump feeds governor pressure. If there is no check ball driving the inner rotor the trans will not shift out of 1st gear. If I remember correctly with a stock valve body the front pump pressure is bypassed and the rear pump supplies fluid pressure for clutches and bands when the vehicle...
I tried again, but still says your inbox is full. You may need to refresh your browser, empty your cache or something like that. When you get a chance.
Good stuff!
#4
Actually, for that distributor you needed to have the ballast resistor. So, you were good there.
Do you have a test light and some form of volt/ammeter? Basically, check one of those wires at the resistor for power when the key is ON. Then, turn the key to START to see if it...
Delrin is pretty unforgiving,
requiring precise alignment.
Not many street
applications will see this
benifit unless certain
machining steps are taken
to ensure no binding occurs.
I've seen delrin bushings
broken in two.
I doubt your're going to see
this type of alignment in
any B-body...