Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
See if you can find a good original bolt.
We've had people show pictures of stripped reproduction bolts here.
Yes antiseize is a good idea.
Just grease should be okay as well.
This is a nice used set of original rear interior mounting panels for top pads. These came from a car that was parted here not long ago. Nice shape. Asking 95.00 shipped. Sold as is. Thanks
Good morning all,
I recently bought new Torsion Bar adjuster Bolt and Bracket from Rare Parts. Yesterday as I was putting my Lower Control Arm in I noticed the bolt provided in the new kit is about 3/4" shorter than the one I'm replacing, do you think this is OK?
I don't remember how far the...
I had this issue on a early 727. It had a crack in the valve body wall next to the throttle pressure valve. Take pressure test at the accumulator. Move the throttle pressure arm rearward. You should see 95-100 psi fully rearward. If it's low you have a valve body issue.
Doug
This dash was removed from a 1972 Dodge Charger. Look at pictures some one must had replace the dash bezel as it's 1974 as it has the break light in the center of the large gauges. It's a used cluster with no tachometer has clock. I do not know the working condition of this as well. It's a great...
Hi
my 69 runner with 383
I have rebuilt stock carb, new distributor with petronix, new coil and carb has fuel
The past few drives car felt a little sluggish like no power at times
Then the other day I started it drove a few hundred feet and it died
Has fuel in carb
Dont know what it could...
Because the fuel enters the bowl at the top and the needle and seat are high up in the bowl, and the bowl is vented, they create a syphon break so fuel can’t be sucked back down the line through the pump. That is unless the needle and seat are leaking and allowing fuel to fill the bowl and then...
The "Performer" IS the intake designed with 273/318 size runners.
I've actually heard the opposite- swapping to an appropriately sized 4 barrel can increase MPG.
This is a set of used 1970 GTX used interior upper door plates. These are not NOS or 100 percent perfect. Look at pictures. They have scuffs and dings. No clips and the have some slight curves in them. When installed they should lay flat. Look again at pictures they are sold as is ask questions...